XDF Porting Tool

All hardware related, disassembly / programming and code discussions belong here.
Post Reply
efloth
Posts: 437
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

XDF Porting Tool

Unread post by efloth »

Very handy tool in development for porting an XDF to a similar strategy. I had over 300 instant accurate results porting AHAC2 to a 94 ranger bin. I will be incorporating SAD into it in the near future. Let me know if you have any questions or feature requests. FYI XDFs must be decrypted in tunerpro first or the app will hang.
Screenshot 2026-09-17 180349.png
Attachments
portxdf_gui.zip
(314.06 KiB) Downloaded 24 times
jsa
Posts: 457
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: XDF Porting Tool

Unread post by jsa »

Neat project.

I get quite a few hits when I upload it to virustotal. May well be false positives, I don't know.
Screenshot_20260926_104058_Firefox.jpg
Is there source code available on github or somewhere, to allow a local build?
efloth
Posts: 437
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: XDF Porting Tool

Unread post by efloth »

Attached. There is a build script included that requires visual studio.
Attachments
portxdf_app917.zip
(2.09 MiB) Downloaded 17 times
jsa
Posts: 457
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: XDF Porting Tool

Unread post by jsa »

Thanks
BOOSTEDEVERYTHING
Posts: 442
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: XDF Porting Tool

Unread post by BOOSTEDEVERYTHING »

Does it need to have the LST file for the original BIN file, or will it work with just the XDF? And, if it does need the LST file, is there an easy way to make one from the XDF? Thanks I would love to try this out with the READ0 LST file I have so far.
Post Reply