Awesome, I will give these a shot and see what I can come up with. Thank You Guys!!
So, would it be easier to add to and edit an XDF or start a spreadsheet and import it somehow? Thanks again.
Also for a 4 bank pcm do I just change the bank count to 4 and pcm type to eec_256? any other changes under the config tab? thanks
EEC V file conversion
-
BOOSTEDEVERYTHING
- Posts: 442
- Joined: 2023 Sep 06, 13:11
- Location: Charlotte NC , USA
- Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100
-
jsa
- Posts: 457
- Joined: 2021 Feb 16, 15:46
- Location: Australia
- Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV
Binary Editor
ForDiag
Re: EEC V file conversion
Spreadsheets are used for BE Definitions. A well layed out DIR can be imported to excel then have formulas applied to generate BE definition data. TP uses XDF which looks like XML plus 'special' characters for data. Taking an existing XDF and changing addresses and other detail is easier than using a spreadsheet and some XSL conversion I think.