How to adjust base idle effectively?

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
Post Reply
m-barans
Posts: 93
Joined: 2021 Feb 16, 23:09
Location: Lafayette, Oregon US
Vehicle Information: 2003 Mercury Marauder 300A with new stock bore IRON 4.6 block, Manley crank, Manley H-tuff h-beam rods, CP pistons with stainless rings, ARP head studs, GT500 lash adjusters and rollers, D series cylinder heads, VMP GEN3R 2.65 L TVS blower, 80 lb/hr FRPP Siemens Deka injectors, HPX slot 100mm MAF, coyote mustang fuel pump with Holley 60 psi filter/regulator return at pump, Stainless works long tube headers and complete exhaust, Moates quarter horse and TunerPro RT with support from Decipha, RZASA strategy.

2001 Ford Lightning SVT F-150 stock engine w/ inlet ported M112, GT500 rollers, ARP head studs, metco quick change upper pulley with stock sized upper, K&N intake system, bassani SS exhaust system from the stock manifold flanges back. 4x4 trans oil pan. SSBC big brakes 14” up front. Work/Street truck. My “next to build” with trick flow heads (before extinction) with h-beams & cobra jet crank (sitting in tool box) and proper pistons. Next up after the marauder is dialed in.

How to adjust base idle effectively?

Unread post by m-barans »

I am wondering how to bump idle effectively… I can change Neutral Base and Drive Base values but it seems like idle spark or something else needs a tweak. Can Someone please tell me how to do this properly? Thanks
Top
decipha
Posts: 6297
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: How to adjust base idle effectively?

Unread post by decipha »

bump up idlrpm as well
Top
Post Reply

Return to “RZASA - 03/04 Marauder”