Load scale in spark table
-
Neald
- Posts: 34
- Joined: 2021 Oct 20, 09:37
- Location: Poughkeepsie, NY, USA
- Vehicle Information: 1989 Ford Bronco II
Stock 2.9 V6, A4ld trans.
CBAZA(6CYL Config)
Moates quarterhorse
Load scale in spark table
Im looking in the C9C1 6cyl bronco ii xdf/bin in the spark table. Is the left column the load percentage? It looks to go from 7.000-29.000 in 2-4 point increments. I'm trying to put this table in my U4P2 tune running the stock 2.9 v6 engine. It seems to have a way different load scale which I don't doubt. Jus wondering why it ends at 29.000. the CBAZA load scale in my tune goes to like 2.00 in load scale.
-
decipha
- Posts: 6297
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'25 F-150 5L
Re: Load scale in spark table
its MAP on the c9c1 as its speed density
-
Neald
- Posts: 34
- Joined: 2021 Oct 20, 09:37
- Location: Poughkeepsie, NY, USA
- Vehicle Information: 1989 Ford Bronco II
Stock 2.9 V6, A4ld trans.
CBAZA(6CYL Config)
Moates quarterhorse
Re: Load scale in spark table
I got some more studying to do ... Thanks