p1000 RZASA code

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
p4ndiamond
Posts: 40
Joined: 2021 May 09, 14:12
Location: Ruston Louisiana
Vehicle Information: 2004 Mercury Marauder DTR
1997 Mustang Cobra
1998 Mustang Cobra
2021 Mustang Eco Boost
1989 foxbody hatch

p1000 RZASA code

Unread post by p4ndiamond »

Monitors have been good for months. I did have to pull my battery unfortunately. Trying to expedite them back as registration is due yesterday .

How does this code work . Is this Key on engine off Hold brake pedal 5 seconds while holding pedal open ?
Attachments
p1000.JPG
decipha
Posts: 5052
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: p1000 RZASA code

Unread post by decipha »

press f10 to read the comments as I've changed that code numerous times over the years.
p4ndiamond
Posts: 40
Joined: 2021 May 09, 14:12
Location: Ruston Louisiana
Vehicle Information: 2004 Mercury Marauder DTR
1997 Mustang Cobra
1998 Mustang Cobra
2021 Mustang Eco Boost
1989 foxbody hatch

Re: p1000 RZASA code

Unread post by p4ndiamond »

Did check through it . No changes.

Seems the two issues i have are the Oxygen sensor heater Test will not complete and neither the catalyst .

Used Forscan to see if i note anything else abnormal . The front two O2 sensors are rapidly turning the heater on and off . maybe 1 time per half second .

No codes in 800+ miles , runs closed loop normally , but refuses to pass this tests . Current draw from front sensors shows 0.96 amps and rears show 0.54 amps .
Post Reply