ive read and wrote a ton of sct chips over the years never an issue
my circa 2008 jaybird just bit the dust monday so imma be in a bind here shortly if my spare jaybird craps out
What is Everyone using for Chips Now?
-
- Posts: 165
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Re: What is Everyone using for Chips Now?
Do you think the jaybird can be repaired?
-
- Posts: 88
- Joined: 2021 Apr 15, 10:56
- Location: Spring Texas
- Vehicle Information: 00 F150 4.6L Extended cab
CVAF1
4R70 3.08
Re: What is Everyone using for Chips Now?
Decipha if your spare dies, let me know, I will send you mine.
-
- Posts: 91
- Joined: 2021 Feb 22, 09:00
- Location: Dallas TX
- Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost
Re: What is Everyone using for Chips Now?
yes works just like a f3v2. no different addressing required.rusty_lawrence wrote: ↑2023 Aug 15, 22:59SCT works ok with the jaybird? Any different settings? I asked this somewhere else on the forum too
-
- Posts: 91
- Joined: 2021 Jun 03, 14:46
- Location: New Orleans
- Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C
wbo2_aem_uego
Re: What is Everyone using for Chips Now?
SCT worked out! TY.
Two questions.
What prevents Tweecer from being able to datalog with Tunerpro like it can with Binary Editor? Is it a matter of writing an appropriate configuration?
what exactly is needed to use the TI Performance writer/programmer instead of the jaybird?
Two questions.
What prevents Tweecer from being able to datalog with Tunerpro like it can with Binary Editor? Is it a matter of writing an appropriate configuration?
what exactly is needed to use the TI Performance writer/programmer instead of the jaybird?
-
- Posts: 5099
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: What is Everyone using for Chips Now?
Someone would need to create a plugin for tweecer to communicate with tunerpro.
-
- Posts: 91
- Joined: 2021 Jun 03, 14:46
- Location: New Orleans
- Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C
wbo2_aem_uego
Re: What is Everyone using for Chips Now?
Found a place that says they have some. Very proud of them though
https://bulletperformanceracing.com.au/ ... tegory/12/
-
- Posts: 91
- Joined: 2021 Jun 03, 14:46
- Location: New Orleans
- Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C
wbo2_aem_uego
Re: What is Everyone using for Chips Now?
Also boostednw has some Moates replacement products and more on the way
https://boostednw.com/moates-hardware-replacements
https://boostednw.com/moates-hardware-replacements
-
- Posts: 285
- Joined: 2021 Feb 16, 15:46
- Location: Australia
- Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV
Binary Editor
ForDiag
Re: What is Everyone using for Chips Now?
Placed an order on their site for a QH from them a while ago. They cancelled the order, then asked for double the advertised price for one they might have laying around in a toolbox. They still have a QH on ebay for silly money. No integrity.rusty_lawrence wrote: ↑ Found a place that says they have some. Very proud of them though
https://bulletperformanceracing.com.au/ ... tegory/12/