SUB2 stock bin - '95 4.9L E4OD

[wwhite]

I'll attempt to test on truck this weekend.
Will give me the opportunity to use TI J3 chip.

[wwhite]

Updated the data logging patch to insert 0xff ... upon removal.

TunerPro button for Remove Patch was not enabled, the attached fixes this.

[wwhite]

For SD V8 351 users, here is my modified bin.
This is a screen shot of changes going from 300ci 6cyl, to 351ci 8cyl:

SUB2 v6 to v8 changes

[Sevensecondsuv]

Thanks all. What is everyone using for an adx file?

[efloth]

We will need to take Michael's standard ADX and add the payload info for SUB2.

[wwhite]

We will need to take Michael's standard ADX and add the payload info for SUB2.

I didn't even think about that when I included the data logging patch.

Here is the current OPs list, probably quite wrong right now in the XDF:

Code: Select all

D6009603B6009A00CC00BA00B40024018A006201F201BE00960070011A01540192008C009000B800B200A8005C016A01DA001A0228024E013802D8005C03140322036C01980300002700015D9E000444A500804400000000

[efloth]

This is the A1C payload info. Did you assume it would be the same on SUB2?
Either way we will need to fill the SUB2 columns of this out.

A1C-J1X-SUB2 Payload.xlsx

(17.64 KiB) Downloaded 401 times

[wwhite]

Didn’t assume, just didn’t think about it.
It’s going to be different.
I can populate that later tonight with correct info

[wwhite]

Here is the sheet with columns filled for SUB2.
A couple are blank, for various reasons, like TOTLDST and VMAF do not exist in LHBH1 strategy.
Also, not sure how the byte payloads are loaded( does QH/TP load a word, and mask the byte).
I put the actual byte address in for payload.
https://docs.google.com/spreadsheets/d/ ... ue&sd=true

[efloth]

give'r a shot

Decipha_210620_SUB2.adx

(384.68 KiB) Downloaded 396 times