Michael,
Can you let let me know if you're
working on my tune? I have not
received any reply in some time.
Tune
-
Dave G
- Posts: 68
- Joined: 2022 Jan 16, 13:19
- Location: Niagara Falls
- Vehicle Information: 1996 Mustang GT
1996 cobra 4V swap
stock Mustang GT computer
UPR K member and A arms
Fresh 1996 Cobra motor with Manly forged internals and
ARP hardware.
Billet oil pump
B cylinder heads with Comp cams
440 / 440 lift
Intake 234
Exhaust 230
@.050
114 degree
Head cooling mod.
Compression 10.7-1
Shorty headers offroad H pipe with Flowmaster mufflers
EGR delete
Bosch 30 lb. Injectors
C&L air intake
Stock throttle body
80 mm mass air
9” K&N air filter
Walbro 255 fuel pump
MSD coil packs
Tremec 6 speed aluminum flywheel and driveshaft
373 rearend with 315/35/17 tires
-
red5.0fogger
- Posts: 150
- Joined: 2021 Mar 22, 15:58
- Location: Newington CT
- Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s
Re: Tune
I would post this on your tuning link with him. just say bump or similar.
-
Dave G
- Posts: 68
- Joined: 2022 Jan 16, 13:19
- Location: Niagara Falls
- Vehicle Information: 1996 Mustang GT
1996 cobra 4V swap
stock Mustang GT computer
UPR K member and A arms
Fresh 1996 Cobra motor with Manly forged internals and
ARP hardware.
Billet oil pump
B cylinder heads with Comp cams
440 / 440 lift
Intake 234
Exhaust 230
@.050
114 degree
Head cooling mod.
Compression 10.7-1
Shorty headers offroad H pipe with Flowmaster mufflers
EGR delete
Bosch 30 lb. Injectors
C&L air intake
Stock throttle body
80 mm mass air
9” K&N air filter
Walbro 255 fuel pump
MSD coil packs
Tremec 6 speed aluminum flywheel and driveshaft
373 rearend with 315/35/17 tires
Re: Tune
I have posted it there but not getting a reply. Just trying
to get my car running correctly. Been a long road.
Thanks.
to get my car running correctly. Been a long road.
Thanks.
-
decipha
- Posts: 5034
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Tune
My apologies for the delay I known you've been waiting for a very long time I'm trying to knock out the que list as I can get to it.
I posted in your thread viewtopic.php?t=725&start=30
I posted in your thread viewtopic.php?t=725&start=30
-
PaulC-turbo5.0
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Re: Tune
Glad to see an update here. Dave is my welding supplier at work and I recommended you to him for this project.