Innovate MTX-L WB Output Settings - Solved

Vehicle specific forum for tuning the Foxbody Chassis Mustangs utilizing the LUX0, GUFA, GUFB, and GUF1 Strategy

Innovate MTX-L WB Output Settings - Solved

Unread postby yeastieBoB » Sat May 05, 2018 4:09 pm

The Innovate MTX-L WB has two analog outputs:

* #1 (yellow) is programmed to output between 0 V for an AFR of 7.35 (gasoline) and 5.0V for an AFR of 22.39.

* #2 (brown) simulates a typical narrow band oxygen sensor. The configuration is 1.1 V for an AFR of 14 and .1 V for an AFR of 15.

Questions:
- Should either of those output defaults be adjusted?
- The WB gauge display changes colors based on the AFR. Should the defaults be adjusted?
Green from 7.3 to 13.2
Yellow from 13.3 to 19.1
Red from 19.2 to 22.0
- What pin do I wire the narrow band sim to? Pin 27? I show that's the EVP sensor.
'93 coupe, stock internal 302, PMAS HPXE 3.5 MAF, 75 TB, Victor 5.0, High Ports, Deka 80 lb inj., 255 pump, B303, 1.6s, Tremec 3550-2, 4.10s, full exhaust, Moates QH v1.6.Q, TunerPro RTv5, X3Z/A9L2/GUFX. Mostly untuned stock bin went 12.68 @ 111.69.
yeastieBoB
Power Poster
 
Posts: 114
Joined: Sat Jun 21, 2014 7:02 pm
Name: Robert
Vehicle Information: '93 Reef Blue coupe. Stock internal 302, PMAS HPXE 3.5 MAF, 75 TB, Victor 5.0, High Ports, Siemens Deka 80 lb/hr inj., B303, 1.6s, Tremec 3550-2, & 4.10s. Cobra EEC mostly untuned went 12.68 @ 111.69 with Pro-M 80mm MAF and 30# inj.
Vehicle 2 Information: '66 F100 shortbed, 352ci, 3 on the tree - on hold
Vehicle 3 Information: '65 Coupe rolling chassis - on hold
Additional Vehicles: 2013 F150 EcoBoost 4x4

Re: Innovate MTX-L WB Output Settings

Unread postby decipha » Sat May 05, 2018 4:36 pm

no never change the defaults

narrow band simulator output is absolutely useless never use it

the egr valve position pin is the correct pin to use for the wideband output to log in the ecu

https://www.efidynotuning.com/config.htm
User avatar
decipha
Tooner
 
Posts: 15770
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: Innovate MTX-L WB Output Settings

Unread postby yeastieBoB » Sat May 05, 2018 6:05 pm

Thanks, so I'll just turn off one HEGO then.
'93 coupe, stock internal 302, PMAS HPXE 3.5 MAF, 75 TB, Victor 5.0, High Ports, Deka 80 lb inj., 255 pump, B303, 1.6s, Tremec 3550-2, 4.10s, full exhaust, Moates QH v1.6.Q, TunerPro RTv5, X3Z/A9L2/GUFX. Mostly untuned stock bin went 12.68 @ 111.69.
yeastieBoB
Power Poster
 
Posts: 114
Joined: Sat Jun 21, 2014 7:02 pm
Name: Robert
Vehicle Information: '93 Reef Blue coupe. Stock internal 302, PMAS HPXE 3.5 MAF, 75 TB, Victor 5.0, High Ports, Siemens Deka 80 lb/hr inj., B303, 1.6s, Tremec 3550-2, & 4.10s. Cobra EEC mostly untuned went 12.68 @ 111.69 with Pro-M 80mm MAF and 30# inj.
Vehicle 2 Information: '66 F100 shortbed, 352ci, 3 on the tree - on hold
Vehicle 3 Information: '65 Coupe rolling chassis - on hold
Additional Vehicles: 2013 F150 EcoBoost 4x4


Return to Foxbody Tuning

Who is online

Users browsing this forum: No registered users and 1 guest

cron