Payloads
First unread post • 12 posts
• Page 1 of 1
Payloads
by dick427 » Sun Jan 10, 2021 12:08 pm
hi wondering if you can help me i down loaded bin A9L201111 GUFX200827 dephifa201109 everything works good but ect rpm and act wont log rpm stays at 0 act and ect stay at 58 i cant figure out what the problem is help would be awesome
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
-
decipha - Tooner
- Posts: 20916
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Decipha Ponto
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w swap - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Other Vehicle(s): Others:
95 Beretta - Delores
00 Lincoln LS - Luanda
08 Grand Prix - Tara
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
00 Explorer 5L - Bernyce
03 Marauder - DyShyKy
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa
12 Explorer - Rystacia
Re: Payloads
by dick427 » Sun Jan 10, 2021 2:34 pm
i have the datalogging patch enabled rev 2020-05-12 still nothing ?
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
Re: Payloads
by decipha » Wed Jan 13, 2021 7:25 am
I'll post some new files when i get to my laptop maybe something went funky.
-
decipha - Tooner
- Posts: 20916
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Decipha Ponto
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w swap - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Other Vehicle(s): Others:
95 Beretta - Delores
00 Lincoln LS - Luanda
08 Grand Prix - Tara
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
00 Explorer 5L - Bernyce
03 Marauder - DyShyKy
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa
12 Explorer - Rystacia
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
Re: Payloads
by decipha » Wed Jan 13, 2021 2:32 pm
well nope i just checked and everything is perfectly fine
remove your ecu and pull the QH off and make sure you've cleaned all the plastic off the j3 port
remove your ecu and pull the QH off and make sure you've cleaned all the plastic off the j3 port
-
decipha - Tooner
- Posts: 20916
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Decipha Ponto
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w swap - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Other Vehicle(s): Others:
95 Beretta - Delores
00 Lincoln LS - Luanda
08 Grand Prix - Tara
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
00 Explorer 5L - Bernyce
03 Marauder - DyShyKy
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa
12 Explorer - Rystacia
Re: Payloads
by dick427 » Wed Jan 13, 2021 10:34 pm
well everything logs when i use GUFB_56k adx ? so i know its not the QH or port ?
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
Re: Payloads
by motorhead1991 » Thu Jan 14, 2021 1:47 am
There might be a chance your XDF and ADX don't match, since decipha was playing with it frequently before the universal ADX came out.
- motorhead1991
- Posts: 296
- Joined: Mon Apr 03, 2017 6:46 pm
- Name: Anthony Cox
- Vehicle Information: 1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.
- Other Vehicle(s): Stock 1990 Ranger. ICM relocation, Volvo 31lb Bosch injectors, custom tune, e85: 82hp/103tq
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
Re: Payloads
by decipha » Thu Jan 14, 2021 11:15 am
I have no idea what he's referring to but if an old antiquated adx logs that means you don't have logging enabled properly.
No other possibilities.
Post your tune file.
No other possibilities.
Post your tune file.
-
decipha - Tooner
- Posts: 20916
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Decipha Ponto
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w swap - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Other Vehicle(s): Others:
95 Beretta - Delores
00 Lincoln LS - Luanda
08 Grand Prix - Tara
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
00 Explorer 5L - Bernyce
03 Marauder - DyShyKy
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa
12 Explorer - Rystacia
Re: Payloads
by dick427 » Thu Jan 14, 2021 9:20 pm
here what im working with
You do not have the required permissions to view the files attached to this post.
- dick427
- General Poster
- Posts: 20
- Joined: Thu Dec 03, 2020 5:34 pm
- Name: Richard Navarro
- Vehicle Information: 1988 Mustang cal mass air 331 stroker 351w D00e heads ported explorer manifold ported long tube headers 224 in 234 ex duration 532-536 lift with 1.7 rockers 108 center line 75mm throttle body cold air intake 24lb injectors c&l maf 55psi fuel pressure 8LD QH and tuner pro dual electric fans innovate a/f gauge g force t5 3.73 gears underdrive pulleys
- Other Vehicle(s): 1967 fastback
12 posts
• Page 1 of 1
Return to Foxbody Tuning (GUFX)
Who is online
Users browsing this forum: No registered users and 1 guest