03/04 Mach 1

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

What all needs to be changed in the tune besides the MAF curve?
decipha
Posts: 4899
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

everything
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

So im going to get the car started with the stock maf setup. So the only mods will be the longtube headers. Unfortunately after the car is together it will not be in the budget for a custom tune, which is why im planning on tuning it myself. Would i be better off using B.E to tune the car since the FBGIO bin is so modified? or is it possible to make the adjustments in the FBGIO for the longtubes myself without much issue?
decipha
Posts: 4899
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

I'll post a stock fbgi0 mach1 tune file soon as I get a chance.

BE will cost more. 160 dongle + 20 moates + 200 def + 96 token == 476
Tunerpro == 0

that doesnt include a custom tune either
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

i already have BE but prefer tunerpro over BE
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Thanks for your help! also is the GT maf curve the same as the mach?
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Question about reading the factory tune with QH. If i pull the factory tune can i read it with tunerpro or would i need to use BE? Also would the xdf and adx you have created for the FBGIO read the factory tune?
decipha
Posts: 4899
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

yep the gt and mach have the same maf curve

yes you can read the ecu using tunerpro

adx and xdf aren't needed to read

mach1 uses fbfg2 strategy natively so would need to be converted to fbgi0
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

What all is involved in converting the fbfg2 to the fbi0?
decipha
Posts: 4899
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

comparing the differences and copying it over
Post Reply