Which LS plug wires

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
dleach1407
Posts: 467
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Which LS plug wires

Unread post by dleach1407 »

I ordered a set and they do not fit. The boot around the coil pack is loose and the wire connector in the plug wires boot isn't compatible with the coils either. The coil has a spade on the bottom. Wrong coils?
decipha
Posts: 4897
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Which LS plug wires

Unread post by decipha »

98 ls1 camaro plug wires
RinerAuto
Posts: 100
Joined: 2021 Apr 14, 15:30
Location: Portsmouth, Virginia
Vehicle Information: 1994 Mustang
302W w/RZASA and CNP
YouTube: RinerAutomotive
Instagram: RinerAutomotive

Re: Which LS plug wires

Unread post by RinerAuto »

dleach, did you find compatible plug wires? I ordered 98-02 Camaro LS1 plug wires and they didn't fit onto the spade connector.

Probably going to grab some from the junkyard to try before ordering another set
dleach1407
Posts: 467
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Which LS plug wires

Unread post by dleach1407 »

Nope. Every coilpack I've found has a spade connector. Maybe the Ford units have a compatible connector
dleach1407
Posts: 467
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Which LS plug wires

Unread post by dleach1407 »

@decipha that's the scoop on these?
decipha
Posts: 4897
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Which LS plug wires

Unread post by decipha »

scoop is you use a stock coil on plug from any 99-04 ford and pull the boot off the end. Take a set of ls1 coil near plug shorty plug wires and it clips right on the end. 5 years ago or so I posted a pic but its gone with the forum upgrade. Soon as I get a chance I'll go rip a coil wire off my camaro and post another pic.
dleach1407
Posts: 467
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Which LS plug wires

Unread post by dleach1407 »

So they have to be motorcraft coils?
decipha
Posts: 4897
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Which LS plug wires

Unread post by decipha »

thats the only coils you can use on a ford all aftermarket coils are crap
RinerAuto
Posts: 100
Joined: 2021 Apr 14, 15:30
Location: Portsmouth, Virginia
Vehicle Information: 1994 Mustang
302W w/RZASA and CNP
YouTube: RinerAutomotive
Instagram: RinerAutomotive

Re: Which LS plug wires

Unread post by RinerAuto »

I just ordered a coil from the new 7.3L godzilla engine to see how it fits. From pictures it looks to be a 2 pin, so shouldn't have a built-in ignitor.
https://www.rockauto.com/en/moreinfo.ph ... 0&jsn=1010

We'll see....
RinerAuto
Posts: 100
Joined: 2021 Apr 14, 15:30
Location: Portsmouth, Virginia
Vehicle Information: 1994 Mustang
302W w/RZASA and CNP
YouTube: RinerAutomotive
Instagram: RinerAutomotive

Re: Which LS plug wires

Unread post by RinerAuto »

2020 7.3L coil was delivered today. Two pin connector. Don't think it will work with LS wires, but can get the ones for the 7.3L too. Would also need the electrical connector as it's different from the 4.6L stuff.
Attachments
PXL_20211227_172556115.jpg
PXL_20211227_172546506.jpg
PXL_20211227_172528554.jpg
PXL_20211227_172503048.jpg
Post Reply