CBAZA and EDIS8

Covers all sn94/95 mustang v8 ecu's.
gothensangel
Posts: 2
Joined: 22 Sep 2021, 13:19
Location: ligonier indiana
Vehicle Information: 95 ford mustang gt svt cobra CBAZA T4M0 351w swap ls hiram intake twin turbo 80lb injectors ported polished gt40 heads

CBAZA and EDIS8

Unread post by gothensangel »

ive been doin some research the last few months and im lost. half of the info ive found is leading me to believe that my CBAZA eec with T4M0 is capable to run a dizzyless edis8 351w in my 95 cobra. another good portion of it is saying its not possible. while a few sources ive found say it can be done if i change it from T4M0 to A4A1 loaded into the CBAZA eec4. also ive tried a lot of different ways so far real application wise and im at a loss on what im not getting to make it work right. ive got the trigger wheel ive got the vr sensor for it ive got the vr cam sync plug and sensor pieces attached and shits all lined up like it needs to be following deciphias(?) directions i found on another forum.
if someone could possible point me into the right direction, an help guide me a little bit id be so grateful
or if someone could idk send me a diy for dummies edition on how to make it work right would be best lmao. jk but seriously i need some guidance guys plz n thx.
decipha
Posts: 1545
Joined: 15 Feb 2021, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: CBAZA and EDIS8

Unread post by decipha »

yep no prob a4a2

youd need a hall effect vr though

best bet is eec v so u wouldnt need an edia module
03 04 luxury sedan ecu
waltnono
Posts: 56
Joined: 17 Mar 2021, 06:44
Location: Lockport, IL
Vehicle Information: 1995 Mustang V8 Swap
WH40
76mm Turbo
4r70W
wbo2-uego

Re: CBAZA and EDIS8

Unread post by waltnono »

Was thinking about this. If I used a 03-04 sedan ecu and wire harness. A explorer timing cover, 36-1 wheel from explorer and ls coils. What else would I be lacking?
decipha wrote: 22 Sep 2021, 16:27 yep no prob a4a2

youd need a hall effect vr though

best bet is eec v so u wouldnt need an edia module
03 04 luxury sedan ecu
decipha
Posts: 1545
Joined: 15 Feb 2021, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: CBAZA and EDIS8

Unread post by decipha »

Can't use ls coils you have to use oem ford coils.

Only thing else you'd need is LS1 plug wires.
waltnono
Posts: 56
Joined: 17 Mar 2021, 06:44
Location: Lockport, IL
Vehicle Information: 1995 Mustang V8 Swap
WH40
76mm Turbo
4r70W
wbo2-uego

Re: CBAZA and EDIS8

Unread post by waltnono »

Great. Thanks for the information
gothensangel
Posts: 2
Joined: 22 Sep 2021, 13:19
Location: ligonier indiana
Vehicle Information: 95 ford mustang gt svt cobra CBAZA T4M0 351w swap ls hiram intake twin turbo 80lb injectors ported polished gt40 heads

Re: CBAZA and EDIS8

Unread post by gothensangel »

decipha wrote: 22 Sep 2021, 16:27 yep no prob a4a2

youd need a hall effect vr though

best bet is eec v so u wouldnt need an edia module
03 04 luxury sedan ecu
so does that mean that the a4a2 can load into my CBAZA t4m0 eec4?
hall effect for the cam?
decipha
Posts: 1545
Joined: 15 Feb 2021, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: CBAZA and EDIS8

Unread post by decipha »

yep and yep
Post Reply