New Forum

Come shoot the shit or scope out the scenery. Either way this is for all non specific posts.
AKshadow
Posts: 2
Joined: 2021 Feb 16, 11:51
Location: Eugene, OR
Vehicle Information: 1977 Bronco
HUG2
2001 5.0L Block
Eagle 347 crank/rods
GT40p heads
FTI Custom Cam
Explorer upper/lower intake
Explorer Throttle Body
4.11 gears
33" tires

Re: New Forum

Unread post by AKshadow »

How about Tapatalk? Big fan of the interface, makes it easy to participate on the fly and in the garage.
decipha
Posts: 4950
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: New Forum

Unread post by decipha »

too much overhead, its got ads, isn't open source and last year was pulled from the play store for andriods
wwhite
Posts: 313
Joined: 2021 Feb 16, 15:53
Location: Victoria, BC, Canada
Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2

Re: New Forum

Unread post by wwhite »

AKshadow wrote: 2021 Feb 17, 23:08 How about Tapatalk? Big fan of the interface, makes it easy to participate on the fly and in the garage.
There is also Discourse: https://github.com/discourse
100% opensource, simple discussion feed.

phpBB is good, and definitely overkill for what your doing here on efidynotuning.

What ever gets the job done.
AKshadow
Posts: 2
Joined: 2021 Feb 16, 11:51
Location: Eugene, OR
Vehicle Information: 1977 Bronco
HUG2
2001 5.0L Block
Eagle 347 crank/rods
GT40p heads
FTI Custom Cam
Explorer upper/lower intake
Explorer Throttle Body
4.11 gears
33" tires

Re: New Forum

Unread post by AKshadow »

decipha wrote: 2021 Feb 18, 11:59 too much overhead, its got ads, isn't open source and last year was pulled from the play store for andriods
Agreed the ads suck, but I think a lot of people pay for the premo version without them ( I don't).

It's back in the play store for Android, for whatever that's worth.

Either way, just grateful for the wealth of knowledge you have and offer to provide.

Now I just need to get my butt in gear and get the truck back together. Machine shop is almost finished with the block. Slight hangup with something I forgot to tell them 🤦
zasxar
Posts: 36
Joined: 2021 Feb 22, 11:26
Location: shreveport louisisana
Vehicle Information: 1993 ford mustang hatch
347ci forged internals
c4
373
wbo2_Innov

Re: New Forum

Unread post by zasxar »

how do we get back on the premium board ?
Denver_SVT
Posts: 25
Joined: 2021 Feb 25, 16:39
Location: Denver, Colorado
Vehicle Information: 2001 Mustang Roush Stage 3 Supercharged with Build Engine

Re: New Forum

Unread post by Denver_SVT »

I was curious of what was happing to the forum. I am glad to register back again and thanks for the new forum.
We gained a lot of knowledge, information and great technical support at this forum and we're looking for more in this new forum. Keep up the good work in your new Forum Decipha. As you mentioned Knowledge is a power.
mustangdriver
Posts: 2
Joined: 2021 Feb 27, 04:57
Location: Leipzig/Germany
Vehicle Information: 1987 Conv. 2.3 DA1
1979 347cui Carter Carb.

Re: New Forum

Unread post by mustangdriver »

Hi,
i´m old member... i wrote the article with the LUX0 conversion for the 4 cylinder. Today I'm looking - no more registration possible, posts gone ...
All in vain. I'm tired of it, sorry. I was just about to write an update with electric fan control and Shiftlight.
Tobias
decipha
Posts: 4950
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: New Forum

Unread post by decipha »

adjusting for cylinder swaps is detailed on the homepage
as well as the fan swap

shift light is just wiring up a light

is their something specific that makes it different on lux0 ?
Motozoic
Posts: 29
Joined: 2021 Feb 27, 14:58
Location: Tucson, AZ
Vehicle Information: '89 Ford Mustang LX 5.0L: A9L2/Tweecer RT
'79 Ford Bronco 400: A9L2/F3V2
'00 Merc Mountaineer 5.0L: READ0/QH currently
'66 Mustang 289: some EEC-V, not determined yet
'08 Buell XB12Ss: DDFI3/TunerPro RT
'09 Buell 1125CR: DDFI3/TunerPro RT

Re: New Forum

Unread post by Motozoic »

I'm baaack! Previously used Shaker666 as my handle. Sorry to hear abou the prior post loss... there was a lot of useful info in here.
ironmanisanemic
Posts: 11
Joined: 2021 Mar 14, 21:45
Location: Toutle, WA
Vehicle Information: 1989 Ford Bronco
U4P0 Processor
393w Stroker, 4R70W

Re: New Forum

Unread post by ironmanisanemic »

Re-Registered... Sucks that the forum crashed, but a little upset that you dont at least plan to make a read only sub fourm where you could archive all of the old threads. I felt that there was quite a lot of useful information that has been lost. Not sure at this point how much i will contribute, because i dont want it all to get lost again. Back when the EECtuning.org forum had a crash they backed up the forum even though it could have been easier to just start over. Even after the forum got a facelift, all of the old threads still exist. You may not feel there is anything of value, but i beg to differ, as i believe a lot of others would as well.
Post Reply