Fast rpm drop on long decel
-
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Fast rpm drop on long decel
If I leave it in gear and do a longer decel, 10 seconds maybe, I believe it goes into dfso pulling fuel, once I clutch in it’ll go rich and the rpms drop way too fast and overshoot idle and it’ll surge a bit. I can easily avoid doing this but thinking it’s not right and I have adjustments to make. What specifically should I be looking to adjust? Dashpot is dialed nicely this only happens on an extended decel
-
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Re: Fast rpm drop on long decel
Ok cool but what do I do with dasmin? Lol
-
- Posts: 5033
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Fast rpm drop on long decel
kick it up
-
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Re: Fast rpm drop on long decel
This has helped out a lot thanks