TunerPro LEVELs - RZASA 1st

Any TunerPro specific issues belong here.
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

TunerPro LEVELs - RZASA 1st

Unread post by decipha »

With my RZASA xdf having over 3,400 parameters its becoming cumbersome to navigate in tree view so figured I'd need to start utilizing the levels to make it easier on myself. This is what I came up with.

LEVELS
10- console pids, scaling - hidden patches, unused normally unchanged stuff
9 - obd2, custom code patches, hardware limits
8 - closed loop algorithms, base tune stuff thats hidden normally
7 - hardware config, fail safe, additional limiters, backflow, ipsibr related
6 - mbt, sarchg, scaling used commonly, etc, vtc, tseif - next level intermediate stuff but not normally needed

ABOVE 5 IS GETTING AWAY FROM TUNING AND IN TO CONFIGURATION

ADVANCED USERS ALL THEY NEED
5 - spark retard, knock sensor, stoich,
4 - perload, fn1036, imrc, startup enrich
3 - dashpot, dfso, isc mul
2 - trans shifting, tcc
1 - maf, bdl, base fuel, rev limiter, axle, driver demand

Posting here for myself to have a reference. Won't be in the other xdf's til 2025 or so.
mechanicalmatch
Posts: 88
Joined: 2021 Apr 15, 10:56
Location: Spring Texas
Vehicle Information: 00 F150 4.6L Extended cab
CVAF1
4R70 3.08

Re: TunerPro LEVELs - RZASA 1st

Unread post by mechanicalmatch »

Good work
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: TunerPro LEVELs - RZASA 1st

Unread post by bad86capri »

How hard is it to re-organize the tree view?
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: TunerPro LEVELs - RZASA 1st

Unread post by decipha »

if you do two parameters a minute, 4 hours a day 3x a week itll take about 2 1/2 weeks
ATPCR
Posts: 148
Joined: 2023 Feb 18, 22:25
Location: Hazel Green Alabama USA
Vehicle Information: 1997 Mountaineer 5.0 that originally had a wasted spark ignition system. I'm converting to coil-near-plug. I will use a 4.6 Luxury Sedan PCM & modified powertrain harness. It will be reprogrammed to operate the Windsor 5.0.

Re: TunerPro LEVELs - RZASA 1st

Unread post by ATPCR »

I assume this does not change the bin order?
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: TunerPro LEVELs - RZASA 1st

Unread post by decipha »

no
Post Reply