TunerPro RT, MAF Tuning and extra datalog channels

Support forum for all TunerPro related issues

TunerPro RT, MAF Tuning and extra datalog channels

Unread postby WhiteLX » Tue Sep 24, 2019 2:07 pm

I'm looking at making the switch from BE to TunerPro RT for my 1992 Mustang 5.0L currently using A9L2. My biggest reason is to update my PC. I'm currently using XP with BE2010 and EA (forget version). Obviously, I'd have to buy new versions of at least BE and possibly EA depending on version. At minimum I'd have to get an additional license for EA. I'd rather not have to spend $120+ for new licenses if I don't have to.

I like EA for the MAF curve tuning feature. Is there an equivalent built in to TunerPro RT or can I open TunerPro RT datalogs in EA and use as I used to? I also have Megalogviewer HD, but I'm not sure if it has MAF curve tuning (I use it for SD tuning on my 2.3 turbo). I find it works much faster for viewing data graphs on my PC vs EA.

One thing I'd like to do is add additional channels for datalogging. Currently I have a DataQ DI-148U and QH with BE on another vehicle which will be going MS2, so I'll have that extra DataQ. I would like to use the DataQ to log Boost with a 3 bar MAP and fuel pressure with a 0-5v transducer, and possibly e85 content. Is there any way to get the DataQ to communicate with TunerPro RT? I already have an LC-1 wired into EGR position.
1986 Merkur XR4Ti
2.3L turbo, crower 5.5" rods, Wiseco 8:1 pistons, ported/big valve head, gutted/ported intake, ported E6 manifold, T04e-44/T3 stgIII @ 21psi, NPR intercooler, Forge 004 BOV, T5 trans, PF3 ECU, VAM to SD conv. 3bar MAP, 55lb injectors, QH, BE, DataQ DI-148U, PLX SM-AFR

1992 Mustang 5.0L notch
stock shortblock, TTI single turbo 60-1 @ 14psi, GT40 irons, Crane 2031, Performer intake, 42lb injectors, A9L, QH, BE, LC-1
WhiteLX
General Poster
 
Posts: 7
Joined: Sat May 16, 2015 12:44 am
Location: Riverside, CA
Name: Eric
Vehicle Information: 1992 Mustang 5.0L turbocharged
T04S 60-1/P-trim .96 A/R
12psi
GT40 iron heads
Performer intake
2031 cam
Tremec 3550
green 42lb EV1 injectors
Pro-M 42lb 3" Univer MAF
A3M ECU A9L2
Moates QH, BE, EA
Vehicle 2 Information: 1986 Merkur XR4Ti
2.3 turbo
44 Trim T4/stg III T3
19psi
ported head, ported/gutted intake
large NPR intercooler
Bob's log header
55lb injectors
Moates QH, BE, EA
LA2 ECU
SVO John's speed density LA BIN
Vehicle 3 Information: 1998 Explorer 5.0L
2wd/4R70w
stock
PCC1

Re: TunerPro RT, MAF Tuning and extra datalog channels

Unread postby decipha » Tue Sep 24, 2019 3:59 pm

in tunerpro i have a maf histogram. It literally shows you the maf corrections to plug in doesn't get any easier than that.

nope no dataq support for tunerpro that i know of. You can use a moates super-logger though.
User avatar
decipha
Tooner
 
Posts: 17845
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer


Return to TunerPro

Who is online

Users browsing this forum: No registered users and 1 guest