E9SE B1B Injector info

Anything not covered in the other forums.
86GT50
Posts: 3
Joined: 2021 Apr 19, 20:25
Location: Toronto
Vehicle Information: 1986 Mustang GT, 5 speed, A9P converted, stock 302 with long tubes.

E9SE B1B Injector info

Unread post by 86GT50 »

hi there, putting together a 347 and trying to learn this tuning stuff, i picked up some E9SE B1B injectors (bosch P/N: 0280150756, believe they are
30#/hr@39psi ) and im having a difficult time finding the info for these, ie: high slope, low slope and break point etc. if anyone has the info, that would be great!

thanks :)
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: E9SE B1B Injector info

Unread post by decipha »

E9 is 1989 those are the stock supercoupe injectors which were also used on the gmc syclone trucks.

The stock SC tune uses the same offset as the stock fox 19s with a high slope of 30 and low of 34 for fuel to be perfecty dialed in on a stock sc. However the stock cal data is wrong.

When I get to my laptop tomorrow I can post the data I use for them.
86GT50
Posts: 3
Joined: 2021 Apr 19, 20:25
Location: Toronto
Vehicle Information: 1986 Mustang GT, 5 speed, A9P converted, stock 302 with long tubes.

Re: E9SE B1B Injector info

Unread post by 86GT50 »

oh very cool, that would be great! thanks so much
86GT50
Posts: 3
Joined: 2021 Apr 19, 20:25
Location: Toronto
Vehicle Information: 1986 Mustang GT, 5 speed, A9P converted, stock 302 with long tubes.

Re: E9SE B1B Injector info

Unread post by 86GT50 »

hey again, hope you had a nice weekend. just found out, 6/8 of my injectors are shot.. dont click when touched to a battery. wont be needing that info any longer, thanks :) i was looking at the Racetronix 01D030x, do you have any experience with them?

thanks
Post Reply