03/04 Mach 1

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

03/04 Mach 1

Unread post by bad86capri »

I know you say (ALL) in description but which strategy would i use for the 4 valve mach 1?
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Let me clarify. Are the tunes the same between the GT and the Mach?
decipha
Posts: 4956
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

FBGI0 covers 2001.5 - 2004 Mustangs V6 GT Mach-1 Cobra Manual and Automatics

No, the tunes are not the same. Regardless you will have to dial it in.

best bet for a mach though is to become a premium member as high compression 4v's can be pesky with timing and dashpot.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

i must be blind because i cant the fbgio bin in the downloads. Am i overlooking it?
decipha
Posts: 4956
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

its at the top with the adx and all

amz2 and mgzt you can pick either
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

So another crazy question. im used to tuning the GUFB. Do the 03 04 cars have factory wideband o2s or are they narrow band?
decipha
Posts: 4956
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

narrowband same as the foxes

the front widebands are 2011+
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

So the mach i have is a 03 with 97 Mark VIII shortblock fresh built and set of 04 9 thread heads. The only thing ill really need to tune for is the 90mm lightning maf and longtube headers. Would i better off getting a SCT handheld or using my QH?
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

BTW im completely new to the mod motor game.
decipha
Posts: 4956
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

sct is garbage for the older vehicles. QH is the only way to go.

yeah you definitely need a remote tune
Post Reply