SeaDoo Jetski Turbo

Marine engine tuning specific forum for boats and various water sport engines

SeaDoo Jetski Turbo

Unread postby decipha » Sat Nov 15, 2014 2:34 am

Just wondering if anyone has any experience with swapping the stock supercharger setup for a turbo on the sea-doo's ??

Ive considered buying one just to play with it.

If im not mistaken I believe they use maptuner to reflash them being speed density MAP based systems only.
User avatar
decipha
Tooner
 
Posts: 12919
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: SeaDoo Jetski Turbo

Unread postby bunso » Fri Feb 26, 2016 7:59 pm

I know this is an older thread but I stumbled across a thread on TURBOFORUMS.COM that has done this. When I have somemore time I will try to hunt it down and paste the link
User avatar
bunso
+Premium Plus Member
 
Posts: 466
Joined: Sat Feb 01, 2014 9:25 pm
Location: Memphis,TN
Name: bunso
Vehicle Information: 93 coupe 10:1 331, Holley aluminum heads 60cc,162cc Intake 242cfm @.500, 2.02/1.60 1.6 scorpions, 80lb Siemens Deka injectors, Adjustable Aeromotive FPR. HPX-E Maf in 3" tube, Lunati 61011 Cam 549/565 221/229 @50 112LS, Trick Flow streetburner intake w/ 1" phenolic spacer, 75mm TB, On3 70mm .70/.96, Air/Air Intercooler, 50mm On3 BOV, 44mm On3 WG, Turbosmart manual boost controller, 3.5" downpipe w/ 3.5" pipe to dynomax race bullet dumped at axle, Stage 2 Snow Performance Meth kit, C4 tranny, 3600 stall, 3.55gears A9L using Moates QH/BE. A9L2 tune w/(mechanical idle adj).


Return to Marine Engine Tuning

Who is online

Users browsing this forum: No registered users and 1 guest