EEC V file conversion

All hardware related, disassembly / programming and code discussions belong here.
BOOSTEDEVERYTHING
Posts: 218
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: EEC V file conversion

Unread post by BOOSTEDEVERYTHING »

Ok. Thank you. But I’m still a little confused about how that would pertain to a dmr file. But I think that’s what jsa was saying we could come back to later. I’ll download the older version of sad when I get home and start looking through and comparing and see if I can find any similar code using tp_eng first. I’ll post what I find , if I can wrap my head around this a bit more.

Also…not sure how what I posted shows that Jsa posted it. Very weird.
jsa
Posts: 261
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EEC V file conversion

Unread post by jsa »

jsa
Posts: 261
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EEC V file conversion

Unread post by jsa »

BOOSTEDEVERYTHING wrote: 2023 Oct 25, 17:10 But I think that’s what jsa was saying we could come back to later.

Also…not sure how what I posted shows that Jsa posted it. Very weird.
Yes, later.

That is weird, I can edit it.
It's as though you logged in as me.
I'm off to change my password.
BOOSTEDEVERYTHING
Posts: 218
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: EEC V file conversion

Unread post by BOOSTEDEVERYTHING »

I posted that right after I posted the previous post. I thought it was weird it wouldn't let me edit the previous post to ask that question.
I am not able to find the version of sad to download that you said to use on rzasa, can you please post a link?
It was done for SAD 3.07.16B, so run it with that version for now.
It quite likely contains errors, from others sources that have been imported.
unless you meant to say version 4.07.16b?
BOOSTEDEVERYTHING
Posts: 218
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: EEC V file conversion

Unread post by BOOSTEDEVERYTHING »

May have found SPARK_M_B_T?
Attachments
sparkmbt.png
jsa
Posts: 261
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EEC V file conversion

Unread post by jsa »

BOOSTEDEVERYTHING wrote: 2023 Oct 25, 20:07 unless you meant to say version 4.07.16b?
Yes sorry, typo fixed.

https://github.com/jsa2340/EEC-IV-disas ... 07_16b.exe
jsa
Posts: 261
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EEC V file conversion

Unread post by jsa »

BOOSTEDEVERYTHING wrote: 2023 Oct 25, 21:12 May have found SPARK_M_B_T?
Paul,

No, I'm not convinced.

Stick to working through TP_ENG for now.
BOOSTEDEVERYTHING
Posts: 218
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: EEC V file conversion

Unread post by BOOSTEDEVERYTHING »

Ok. Just thought I saw something and wanted to confirm. I’ll stick to the tp_eng. Lol. Should there be more occurrences of the tp_eng that I am looking for or just pointers to other functions from tp_eng? Sorry if that’s a silly question. Also, should I be focused on the lst files or the msg files or both?
BOOSTEDEVERYTHING
Posts: 218
Joined: 2023 Sep 06, 13:11
Location: Charlotte NC , USA
Vehicle Information: 1999 Ford Ranger with 2000 Explorer v8 swap, FLN0
2003 Ford F150 Harley Davidson, Built 5.4L SOHC with 3.4L Whipple and Built 4R100

Re: EEC V file conversion

Unread post by BOOSTEDEVERYTHING »

Found this one. I'm still working out exactly what it is doing, I'll edit this post later if I can figure it out, lol.
Also, where can I find a calculator to figure out that this-[Rec+c8] is [11548]? I have downloaded a couple of hex calculators from the apple app store but cant seem to find one that works well for me. Thanks so much for your help, again.
Attachments
Annotation 2023-10-26 102643.png
jsa
Posts: 261
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EEC V file conversion

Unread post by jsa »

BOOSTEDEVERYTHING wrote: 2023 Oct 26, 08:10 Should there be more occurrences of the tp_eng that I am looking for or just pointers to other functions from tp_eng?
Consider it unknown, so search for more occurences to prove either way.
Also, should I be focused on the lst files or the msg files or both?
LST and the 2 strategy docs I previously mentioned.
Post up the page number from each strategy for the tp_cnt>tp_eng sub.
BOOSTEDEVERYTHING wrote: 2023 Oct 26, 10:31 Found this one. I'm still working out exactly what it is doing, I'll edit this post later if I can figure it out, lol.
Good find.
Post up the DIR and CMT entries for it.
Also, where can I find a calculator to figure out that this-[Rec+c8] is [11548]
The default windows calculator can be set to programming mode to do it.
Post Reply