03/04 Mach 1

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Thanks!
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

decipha wrote: 2022 Aug 03, 13:37 I'll post a stock fbgi0 mach1 tune file soon as I get a chance

Hey Decipha have you had a chance to post dig up your stock mach 1 tune?
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

Nope and I won't get any free time to get to it anytime soon most likely.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

I just finished my startup tune for the mach. The car has a 3650 trans, stock 3.55 gears, longtubes and a X-pipe so i applied the patch for only 1 hego and i applied the patch to disable the rear hegos. I turned off the EGR and disabled the PATS as well. Do you mind looking over it when you get a chance? I want to make sure im not missing anything. Thanks again for your support!
Attachments
03Mach_Startup_Tune.bin
(256 KiB) Downloaded 172 times
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Heres a revised tune. The one i posted yesterday did not have have DeltaP data updated.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

03Mach_Startup_Tune.bin
(256 KiB) Downloaded 176 times
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 03/04 Mach 1

Unread post by decipha »

what injectors do you have?
read out and post back your stock tune to copy pats over
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

Im using the stock 24s. When i get to that point i will read out the stock tune and post back.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

The data for the injectors i got off of the homepage and deltaP info from factory ford data sheet.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: 03/04 Mach 1

Unread post by bad86capri »

I finally got the mach together and im planning on starting the tuning process tomorrow. Is FN2200 the base spark table? if so is the easiest way to convert it to a N/A 4valve is add 11 degrees to the whole table?
Post Reply