Logging wideband
-
PaulC-turbo5.0
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Logging wideband
Going to finally get my wideband tied in so I can log it. Do I need to unhook the egr valve plug completely or can I just cut the wire for the position sensor so the valve will still function?
-
decipha
- Posts: 5049
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Logging wideband
just unplug it
-
PaulC-turbo5.0
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Re: Logging wideband
Ok sounds good. Is it really a big no-no to tap the wire in the engine bay? My computer is tucked away so it’d be a lot easier.
-
decipha
- Posts: 5049
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Logging wideband
any resistance will throw it off a tad
not that big of a deal
not that big of a deal
-
PaulC-turbo5.0
- Posts: 104
- Joined: 2021 Feb 15, 21:56
- Location: Lancaster New York
- Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!
Re: Logging wideband
happy to report I am now FINALLY logging my wideband and its working well. I tapped into the brown/green wire at the EGR valve and it seems to working just as it should. The only thing I notice is the reading swings around quite a bit more on the laptop vs the actual gauge?