Accuracy of stock slot in 3.5" tube

Non-specific forum for discussing hardware issues such as wideband faults, MAF, Injectors, etc..

Accuracy of stock slot in 3.5" tube

Unread postby 94LSVT » Wed Sep 27, 2017 3:18 am

Both my cars are using this set up and both have issues being accurate below 1.5v or about 100kg/hr. It seems as if they both idle ok but its more cruising that they get confused. I have a screen on one car and the other has a tube with no joints in it so the screen would have to be pretty far from the meter. Its not uncommon to have an AFR error plus or minus 10%. This makes it very difficult to dial in fuel in this area. Am i asking for too much out of this setup?
General Poster
Posts: 70
Joined: Wed Jan 29, 2014 9:59 pm
Name: scott
Vehicle Information: 91' Mustang 5.0 LX
A9L2 w/ Quarterhourse & BE
347 stroker w/ TFS 190s & R manifold
Comp Cams XE282HR

79' Mustang
351w w/AFR 185s & GT40 intake

Re: Accuracy of stock slot in 3.5" tube

Unread postby decipha » Wed Sep 27, 2017 10:58 am

toss more screens on it, 2 screens before the maf and two after should make it rock solid
User avatar
Posts: 15314
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Return to General Hardware

Who is online

Users browsing this forum: No registered users and 1 guest