Load Scaling and Boost

non vehicle specific forum for tuning all other EEC-IV

Load Scaling and Boost

Unread postby Someone82 » Fri Nov 29, 2019 2:42 pm

OK so I'm currently at a conservative 6.5 psi but my peak load number that I've seen is 1.8 at 5900RPM. I'm trying to hit closer to 8 psi, because of this I feel I need to re-scale load to 1.4 so I need to change SARCHG to 385.38 (from 301.08) per your write up. Understand I need to rescale the Y axis on my sealevel spark, but what I'm not understanding is what I do with my FN035. Do I re-run with my belt off or do I just divide my current figures by 1.28?

16384 0.00
6500 0.56
5200 0.70
3900 0.76
2600 0.66
1300 0.56
0 2.00
Someone82
General Poster
 
Posts: 13
Joined: Wed Aug 21, 2019 12:32 pm
Name: Matt Williams
Vehicle Information: 1993 Mustang Cobra, Vortech non intercooler V3, 6lb kit soon to tune with moates qh

Re: Load Scaling and Boost

Unread postby decipha » Fri Nov 29, 2019 5:44 pm

divide it by 1.28
User avatar
decipha
Tooner
 
Posts: 18212
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Re: Load Scaling and Boost

Unread postby Someone82 » Fri Nov 29, 2019 9:43 pm

Perfect, thanks for the help!
Someone82
General Poster
 
Posts: 13
Joined: Wed Aug 21, 2019 12:32 pm
Name: Matt Williams
Vehicle Information: 1993 Mustang Cobra, Vortech non intercooler V3, 6lb kit soon to tune with moates qh


Return to EEC-IV Tuning

Who is online

Users browsing this forum: No registered users and 1 guest

cron