PID fn1358 help

Non-vehicle specific forum for tuning all ford ecu's 1994-2004, including the 1994-1995 Mustang, 93-98 Mark VIII, 99+ F-150, 99-04 Mustang, 03-04 Cobra, 99-03 Harley Davidson and Lightning F-150

FBFG2, CBAZA, CZAJL, and all EEC-V

PID fn1358 help

Unread postby Turbo95stang » Mon Oct 30, 2017 11:06 pm

Im reading scaling by Michael decipha and cant find FN1358. Can someone point me in the right direction for PID FN1358 inferred airmass im using strategy CBAZA calibration u4p2 from Sailorbob. When I'm in Binary Editor and I click on find and type in FN1358 it shows no match found even if I spell out inferred airmass. I need to apply my scaling percentage to reduce all cells on the bottom 3 rows going by the write up by depcipha
Turbo95stang
+Premium Plus Member
 
Posts: 83
Joined: Mon Oct 30, 2017 5:17 pm
Name: R carlin
Vehicle Information: 95 mustang 5.0 with hellion fox turbo kit 76mil Turbonetics turbo jgs wastegate 50mil tail bov and gt40p heads with trick flow upgraded valve springs,93 cobra upper,lower intake,3in pro m maf cal for 60lb inj,80lb seimen deka injectors,PRO M fuel pump hanger 8an feed 6an return,Glen performance fuel rail,aeromotive remote regulator with BBK pressure gauge ,foxbody timing cover with alternator,power steering,water pump accessories 70 mil throttle body, quarterhorse tuning with Binary Editor and eec analyzer with sailor Bob strategy CBAZA U4P2

Re: PID fn1358 help

Unread postby sailorbob » Tue Oct 31, 2017 4:11 am

The 'MAF Failure Substitute' (aka FN1358) table does not exist in the CBAZ* strategies.
sailorbob
Tuning Extraordinaire
 
Posts: 133
Joined: Tue Jul 16, 2013 1:04 am

Re: PID fn1358 help

Unread postby decipha » Tue Oct 31, 2017 5:59 am

correct that doesn't exist in cbaza, thanks for pointing that out I need to change that in the write up

the function you are looking for is going to be FN040? im going off the top of my head as I don't have my laptop with me but its the substitute airmass function used when the fail fails, its not critical and you can proceed without it but it should be updated
User avatar
decipha
Tooner
 
Posts: 14789
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: PID fn1358 help

Unread postby sailorbob » Tue Oct 31, 2017 6:20 am

The 'Estimated Load Table' (aka FN1036A) table is used as part of the failure management when the MAF has failed in the CBAZ* strategies.
sailorbob
Tuning Extraordinaire
 
Posts: 133
Joined: Tue Jul 16, 2013 1:04 am

Re: PID fn1358 help

Unread postby Turbo95stang » Tue Oct 31, 2017 8:41 am

Ok thanks for the reply. Ok so fn1358 does not exist in CBAZA but GUFX strategy fn1358 is available . So in the write up for scaling CBAZA its supposed to be fn040 substitute air mass function.
Turbo95stang
+Premium Plus Member
 
Posts: 83
Joined: Mon Oct 30, 2017 5:17 pm
Name: R carlin
Vehicle Information: 95 mustang 5.0 with hellion fox turbo kit 76mil Turbonetics turbo jgs wastegate 50mil tail bov and gt40p heads with trick flow upgraded valve springs,93 cobra upper,lower intake,3in pro m maf cal for 60lb inj,80lb seimen deka injectors,PRO M fuel pump hanger 8an feed 6an return,Glen performance fuel rail,aeromotive remote regulator with BBK pressure gauge ,foxbody timing cover with alternator,power steering,water pump accessories 70 mil throttle body, quarterhorse tuning with Binary Editor and eec analyzer with sailor Bob strategy CBAZA U4P2


Return to EEC-V & SN95 Tuning

Who is online

Users browsing this forum: No registered users and 16 guests