Finding payload address
Posted: 2021 May 20, 17:47
I am trying to disassemble a bin for the first time, but struggling to follow along with the writeup and I want to check with you guys if I'm even remotely close to doing this correctly.
The goal was to locate payload addresses in order to update the universal ADX for a new strategy. The trouble I'm having is finding the connection between the address from the disassembler to align with a payload name to add in the adx.
e.g. From the disassembly writeup Quick Reference --> Engine speed (N) should be found with 79,04,3c . In my SAD lst, I find:
Is this saying that engine speed is stored at address a7e6? I must be missing something in this process, because when I compare to another bin which already has datalogging support, this method doesn't line up. If anyone has an example to point me in the right direction, it would be greatly appreciated.
The goal was to locate payload addresses in order to update the universal ADX for a new strategy. The trouble I'm having is finding the connection between the address from the disassembler to align with a payload name to add in the adx.
e.g. From the disassembly writeup Quick Reference --> Engine speed (N) should be found with 79,04,3c . In my SAD lst, I find:
Code: Select all
0a7e6: 79,04,3c sb2b R3c,4 R3c -= 4;