TunerPro RT, Quarterhorse, dashboard gauges do not work.

Non-vehicle specific forum for tuning all ford ecu's 1994-2004, including the 1994-1995 Mustang, 93-98 Mark VIII, 99+ F-150, 99-04 Mustang, 03-04 Cobra, 99-03 Harley Davidson and Lightning F-150

FBFG2, CBAZA, CZAJL, and all EEC-V

TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Thu Nov 08, 2018 4:19 pm

Hello, first post from EFI tuning newbie.
I bought a 95 Cobra a couple months ago that came with Quarterhorse v1.6.Q and 4 tune selector. Car was tuned w/BE and runs good with no bad habits, but smells like it is running very rich.

I bought a new laptop and downloaded TunerPro RT, loaded current Bin file that came with car, downloaded CBAZA XDF file from this site and have tried at different times to download all 3 ADX files from this site, but 1 of the ADX files will not open.

When connecting to my car, TPRT shows my Bin, XDF and ADX files at top as well as on the bottom I get Emulation, Hardware Quarterhorse v1.6.1 and DA connected.

PROBLEM:
None of the gauges on my dashboard work.

What am I doing wrong?

Thanks
Ken R
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Thu Nov 08, 2018 4:35 pm

I forgot to add that I went step by step following the "How To Get Started" tip sheet from this site as well as the TunerPro RT v5; Using TPRT with Quarterhorse from Moates Support and it still won't work.

Thanks again
Ken R
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby decipha » Thu Nov 08, 2018 7:23 pm

that is because you do not have the correct cbaza adx file, I know this because it is not available for download

what adx file do you have?

attached old cbaza adx
You do not have the required permissions to view the files attached to this post.
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Thu Nov 08, 2018 8:45 pm

The How To: Getting Started that was last updated 2017-11-07, says that with the release of the Universal ADX Datalogging file as of January 2017, there is only one ADX file to datalog all Fords. It also says that all of the files are exactly the same, so I have been using the Ford Universal ADX 20171109.
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby decipha » Thu Nov 08, 2018 8:50 pm

yea but I never wrote the universal adx patch code for cbaza, not until a few moments ago
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Fri Nov 09, 2018 7:07 am

COOL!
So is the the “attached old cbaza adx” above the adx I should use or should I wait until the one you just wrote shows up on the download page?
Thank you so much for your help.
Ken R
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby decipha » Fri Nov 09, 2018 8:20 am

yea go ahead and use it should work fine

I posted a thread with the new cbaza adx to test if u want
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Fri Nov 09, 2018 2:34 pm

Thank you so much.
I will give this one a try first and see if this gets me up and running.
I checked out the test one, but since it has extra steps to install, I better give this one a try first. This is all new to me.


Thanks again

Ken R
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby Zoomschwortz » Fri Nov 09, 2018 4:33 pm

WOO HOO! I have a working dashboard!
Datalogging is working too, just did my first official Datalog.
Now I need to find all of the definitions and figure out what is going on.

My LAMBSE is idle 1.008, cruise 0.953, full throttle .813 and deceleration 1.0

At least I now have some numbers to work with.
Once I get a little comfortable with this, I will try your new tune a try, but right now on a scale of 0-1000 for EFI tuning knowledge, I'm at level 0.5, possibly lower.
Time for me to do some studying.

Thank you so much for all of your help!
Ken R
Zoomschwortz
General Poster
 
Posts: 6
Joined: Thu Nov 08, 2018 3:55 pm
Name: Ken
Vehicle Information: 95 Ford Cobra, CBAZA, Quarterhorse v1.6.Q w/rotary tune selector, TunerPro RT,

Re: TunerPro RT, Quarterhorse, dashboard gauges do not work.

Unread postby decipha » Fri Nov 09, 2018 6:45 pm

yea np
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce


Return to EEC-V & SN95 Tuning

Who is online

Users browsing this forum: No registered users and 3 guests