my junk at 5028'

Forum for racing results, dyno pulls, track vids, etc... include time slip and/or link(s) to video(s) if you have them

my junk at 5028'

Unread postby wywindsor » Sun May 17, 2015 6:09 pm

So over the last few years Dechipha has helped me tremendously. my combo seems alright but different to the internet hype. I have the combo in my sig that don't cooperate all the time. the calculation s say 147# of cranking compression per the net with elevation correction. I get 127 and no leak down t speak of. the cam is has suspension in my take for the low compression. this is another reason I have come up with the results and conclusion I have at this point.

My weekend went as usual pull the car out and make a run with the last known combo that worked . she ran 11.9 with the smaller pulley that makes more boost and run a great 60' time but lays down after that. So I changed the pulley and run a 11.65 with a tad bit les on the 60'. So I add more timing just to see here it will lead. According to all the internet hype 22 degree's is close to the limit. take a guess where my timing and afr is with pump gas at 5000' not corrected . I have time slips to prove where the timing and afr is Just in case. right or wrong I have made more powah. Best pass is 11.43 at 119 8# of boost. Fire away
Premium Member
Posts: 74
Joined: Thu Jul 18, 2013 4:29 pm
Location: wyoming
Name: Ray
Vehicle Information: 1990 fox with a custom eaton m112, tfs 192 highports an afm b4 cam accu fab 1 3/4 long tubes, a9p gufb, 80# siemens inj.9.2 to 1 comp. in a 347

Re: my junk at 5028'

Unread postby red5.0fogger » Sun May 17, 2015 6:25 pm

Good stuff that's pullin hard.

I guess 28 degrees because of altitude.
Premium Member
Posts: 481
Joined: Mon Oct 06, 2014 5:02 pm
Name: George
Vehicle Information: 86 GT, stock block, twisted wedge heads, Anderson N41 cam, cobra intake, 180 shot, 3.73 gears, T-5 trans, 24# injectors, 155Lph fuel pump, 73mm C&L mass air meter, moates QH tuned by Decipha, Mac 1 5/8 shorty headers, Flowmaster 2 chambers, Drag radials, South Side control arms circa 1999.

Re: my junk at 5028'

Unread postby decipha » Sun May 17, 2015 6:43 pm

that was with the fox or the wifes new edge ?
User avatar
Posts: 18480
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Return to Racing & Dyno Results

Who is online

Users browsing this forum: No registered users and 1 guest