Anyone using RSAZA on a pushrod 302?

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
91GTman
Posts: 13
Joined: 19 Feb 2021, 10:02
Location: Wilmington, NC
Vehicle Information: 1991 Ford Mustang GT
A9L - BE/EA
306, RPM heads, Cometic Gaskets, F-cam, Cartech intake, Pro-M blowthru, 80lb deka, DIY GT42 Turbo, Tremec 5sp, 3.73, Baseline Suspension

Anyone using RSAZA on a pushrod 302?

Unread post by 91GTman »

Looking for pics/info on how you mounted/located the coils
dleach1407
Posts: 182
Joined: 21 Mar 2021, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Anyone using RSAZA on a pushrod 302?

Unread post by dleach1407 »

Yes, i am. You can mount them anywhere. I plan on putting them on the valve cover and using ls wires. You could mount them on the firewall and build custom plug wires too.
91GTman
Posts: 13
Joined: 19 Feb 2021, 10:02
Location: Wilmington, NC
Vehicle Information: 1991 Ford Mustang GT
A9L - BE/EA
306, RPM heads, Cometic Gaskets, F-cam, Cartech intake, Pro-M blowthru, 80lb deka, DIY GT42 Turbo, Tremec 5sp, 3.73, Baseline Suspension

Re: Anyone using RSAZA on a pushrod 302?

Unread post by 91GTman »

Awesome, do you plan on using oem coils? How far off are you from doing the coils on your build? Having a hard time finding pics of ford coils mounted on a pushrod 302
dleach1407
Posts: 182
Joined: 21 Mar 2021, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Anyone using RSAZA on a pushrod 302?

Unread post by dleach1407 »

I'm an using 2v coils since they have a mount hole. I'm building a bracket to weld directly to the valve cover to hold them. You won't find pictures of them most likely. It's not common. I'm still a ways off on that. I'm still messing with the air bag suspension but i already have the ecu wiring roughed in.
sriner86
Posts: 6
Joined: 14 Apr 2021, 15:30
Location: Portsmouth, Virginia
Vehicle Information: 1994 Ford Mustang
T4MO

Re: Anyone using RSAZA on a pushrod 302?

Unread post by sriner86 »

I'm in the planning phase right now. I have the engine harness and ECU. The plan is to complete it over winter off season and get it running/tuned early spring. I'm also thinking a bracket on the valve covers is the best option for mounting the coils.
dleach1407
Posts: 182
Joined: 21 Mar 2021, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: Anyone using RSAZA on a pushrod 302?

Unread post by dleach1407 »

I'm about to build a press brake so i can bend up the bracket. I'm still collecting parts but I'm really close to getting it running. I should have it running before the end of the year. I have so much to do on the truck, It's overwhelming so i lost interest for a bit this summer.
sriner86
Posts: 6
Joined: 14 Apr 2021, 15:30
Location: Portsmouth, Virginia
Vehicle Information: 1994 Ford Mustang
T4MO

Re: Anyone using RSAZA on a pushrod 302?

Unread post by sriner86 »

dleach1407 wrote: 19 Sep 2021, 01:35 I'm about to build a press brake so i can bend up the bracket. I'm still collecting parts but I'm really close to getting it running. I should have it running before the end of the year. I have so much to do on the truck, It's overwhelming so i lost interest for a bit this summer.
Definitely been there. I have a 4runner that's been sitting waiting on an engine swap.

I'd be interested in see the brackets you come up with. I'm debating trying to do bolt on to valve cover bolts, or welding on bolt pads on top of valve cover, or through bolts on top of valve cover.
Post Reply