EEC-V harness fab? No problem anymore!

ECU Diagnostics, Discussions, and Support

EEC-V harness fab? No problem anymore!

Unread postby ironmanisanemic » Fri Aug 05, 2016 12:13 am

So i have been able to finally identify the TYCO part numbers for the 104pin connector so you no longer need to rely on junk yard parts.

Female Terminal - F4SB-14487-AA or XL2T-14487-AA - 776235-1 sourced from onlinecomponents.com

ECU Connector End (solders to the pcb) - F5SB-14A624-AA - 770750-1 sourced from onlinecomponents.com minimum order quantity of 6

Harness Connector End(bolts to the ecu) - F5SB-14A464-AA - 776557-1 sourced from onlinecomponents.com minimum order quantity of 48 (i ordered these from connectorpeople.com, they have them in stock but have a $25 dollar minimum. i ended up ordering 6 of them for just over that.)

Gasket - 776237-1 - sourced from onlinecomponents.com minimum order quantity of 625

Housing cover (strain relief) - 770768-1 - sourced from onlinecomponents.com

All of the part numbers listed AFTER the Ford numbers are the TE Connectivity numbers (formerly Tyco Electronics). Those should be able to be sourced virtually anywhere.

I am still looking for vendors for the few parts that have to be purchased in bulk.

EDIT

Added tech docs and tech drawings
You do not have the required permissions to view the files attached to this post.
ironmanisanemic
A+ Contributor
 
Posts: 150
Joined: Sat Nov 09, 2013 10:50 am
Location: Vandenberg AFB, CA
Name: Miles
Vehicle Information: 89 Ford Bronco - 393W, Professional Products 190cc heads, Custom Comp Cams hyd roller cam, Edelbrock EFI Mustang intake, 10:1 compression, 30lb TrickFlow injectors, ProM 80mm Mass Air Meter, 2-1/2" into 3" y pipe, no cat, and hooker aerochamber muffler. U4P0 computer with Quarterhorse and BE, EA. AOD with all of the goodies.

Re: EEC-V harness fab? No problem anymore!

Unread postby jsa » Fri Aug 05, 2016 1:11 pm

Excellent. Thank you for sharing.
Cheers
John
jsa
Power Poster
 
Posts: 303
Joined: Thu Jan 16, 2014 1:44 am
Location: In the shed or On the Computer, 'straya
Name: John
Vehicle Information: Escort RS Cosworth
EEC-IV GHAJ0 ANTI or COSY

Re: EEC-V harness fab? No problem anymore!

Unread postby decipha » Fri Aug 05, 2016 1:17 pm

excellent work miles, hopefully others that come searching will benefit from your efforts

stickied
User avatar
decipha
Tooner
 
Posts: 13357
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: EEC-V harness fab? No problem anymore!

Unread postby ironmanisanemic » Fri Aug 12, 2016 10:22 pm

So i finally got the terminals and the connectors in that i ordered. They are exactly what they appeared to be in the tech drawings. I have attached a few pictures.

Also, I was informed by the folks at connectorpeople.com when i ordered the connectors that they have a different part number for the terminals that go in it. They sent me a small sample of them to compare to the ones i purchased from onlinecomponents.com. They are identical, even though they are different part numbers. The best part is... THEY ARE WAY CHEAPER!

Lets break this down.

Part number 776235-1 (first number I had found) sourced from onlinecomponents.com cost $0.386 each. No minimum quantity, only minimum $50 purchase. If you only buy these from them you get 130 terminals for the minimum purchase amount.

Part number 776326-1 (new number i was given) sourced from connectorpeople.com cost $0.121 each. Minimum of 83 to be purchased at a time, also has a minimum $25 purchase. If you only buy these from them you get 207 terminals for the minimum purchase amount.

If you buy the terminals and the housing from connector people, you can save on shipping, and save money. The housing from connector people is only $4.99 each. But you have to buy a minimum of 3.

Lets say you buy the 3, thats $14.97, then you get 300 terminals so you have 100 per housing and that will probably give you some left overs since not every position is filled. So thats an extra $36.30. So for $51.27 plus freight and tax, you get what you need plus spares that you could unload on ebay if you so choose.

I know that this is a way cheaper option considering that mass-air.com sells the bare connector on ebay for $59.95 plus shipping, and if you want it with terminals its $149.95 plus shipping. They also will NOT sell you just the terminals.
You do not have the required permissions to view the files attached to this post.
ironmanisanemic
A+ Contributor
 
Posts: 150
Joined: Sat Nov 09, 2013 10:50 am
Location: Vandenberg AFB, CA
Name: Miles
Vehicle Information: 89 Ford Bronco - 393W, Professional Products 190cc heads, Custom Comp Cams hyd roller cam, Edelbrock EFI Mustang intake, 10:1 compression, 30lb TrickFlow injectors, ProM 80mm Mass Air Meter, 2-1/2" into 3" y pipe, no cat, and hooker aerochamber muffler. U4P0 computer with Quarterhorse and BE, EA. AOD with all of the goodies.

Re: EEC-V harness fab? No problem anymore!

Unread postby yeastieBoB » Sat Aug 13, 2016 4:46 pm

That is really great information. Thanks for taking the time to share.
X3Z '93 coupe, rebuilt stock internal 302, ProM 80 MAF, 75 TB, Victor 5.0, Stage 3 High Ports, 30# inj., 255 pump, B303, 1.6s, Tremec 3550-2, 4.10s, full exhaust, Moates QH/BE/EA. Mostly untuned it went 12.68 @ 111.69.
yeastieBoB
General Poster
 
Posts: 23
Joined: Sat Jun 21, 2014 7:02 pm
Name: Robert
Vehicle Information: '93 Reef Blue coupe. Stock internal 302, 80 MAF, 75 TB, Victor 5.0, High Ports, 30# inj., B303, 1.6s, Tremec 3550-2, & 4.10s. Cobra EEC mostly untuned went 12.68 @ 111.69.
Vehicle 2 Information: '66 F100 shortbed, 352ci, 3 on the tree - on hold
Vehicle 3 Information: '65 Coupe rolling chassis - on hold

Re: EEC-V harness fab? No problem anymore!

Unread postby zslash28 » Sun Mar 26, 2017 12:00 pm

I have been searching and searching for quite some time. Came across your previous thread and thought the trail had gone dead. Thank you for sticking with it, and posting this information. Looks like the female terminals are on back order until June of 2017. Fingers crossed I can get my hands on enough to build my harness in a few months.
zslash28
User
 
Posts: 1
Joined: Sun Mar 26, 2017 11:55 am
Name: Kevin
Vehicle Information: 1972 Ford F100. Has 2004 Mach 1 Engine. Ford EEC-V with factory tuning.

Re: EEC-V harness fab? No problem anymore!

Unread postby ironmanisanemic » Sun Mar 26, 2017 1:56 pm

Man, connector people had a ton of both of the part numbers for the terminals, but someone cleaned them out! Should have done that myself... Oh well. Good luck on the hunt. Let me know if you find a new source of them.
ironmanisanemic
A+ Contributor
 
Posts: 150
Joined: Sat Nov 09, 2013 10:50 am
Location: Vandenberg AFB, CA
Name: Miles
Vehicle Information: 89 Ford Bronco - 393W, Professional Products 190cc heads, Custom Comp Cams hyd roller cam, Edelbrock EFI Mustang intake, 10:1 compression, 30lb TrickFlow injectors, ProM 80mm Mass Air Meter, 2-1/2" into 3" y pipe, no cat, and hooker aerochamber muffler. U4P0 computer with Quarterhorse and BE, EA. AOD with all of the goodies.


Return to ECU Discussions

Who is online

Users browsing this forum: No registered users and 1 guest