RZASA adx?

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

RZASA adx?

Unread post by dleach1407 »

Does the RZASA need an ADX file? I don't see it listed in the downloads section.
ConWasabi
Posts: 14
Joined: 2021 Feb 15, 16:42
Location: Vista, CA
Vehicle Information: 69 Bronco w/ 89 Fox 5.0 HO, Explorer: Front Dress, gt40 heads, intake, distributorless ignition w/coil packs, 03 Vic MPC-185 & 01 f150 HD harness, [Quarterhorse, RZASA]

Re: RZASA adx?

Unread post by ConWasabi »

<edited>

Standardized adx can be used from any other decipha adx but you have to manually select the strategy your using it on.
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: RZASA adx?

Unread post by decipha »

All of the adx files are the same just the strategy isnt selected if you need to swap strats.

Best to just hold off til I post one with rzasa selected when i get a free moment.
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: RZASA adx?

Unread post by dleach1407 »

Thanks. I started building my truck and will to need to build a base tune to get it started. Got the 21 circuit harness installed this weekend and Ill be starting the engine harness this week.
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: RZASA adx?

Unread post by decipha »

its posted
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: RZASA adx?

Unread post by dleach1407 »

Thanks Mike!
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: RZASA adx?

Unread post by dleach1407 »

Is there a write up for the RZASA minimum changes for needed like there is for CBAZA?

Edit: I think i found it under eec-v strategy swap
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: RZASA adx?

Unread post by decipha »

its not up to date but should get you going

http://efidynotuning.com/eecv.htm
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: RZASA adx?

Unread post by dleach1407 »

So I am running into my first problem. the continental data does not have any of the deltaP data that is required for the injector data. Is there a way to calculate the information? The injector data I have is for 43.5psi
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: RZASA adx?

Unread post by decipha »

only way to calculate it is to dial it in. But your not running a returnless fuel system so you don't need it.
Post Reply