Search found 1864 matches
- 2023 Dec 31, 10:57
- Forum: Hardware, Programming & Disassembly
- Topic: Clock speeds of any/all boxes
- Replies: 7
- Views: 2037
Re: Clock speeds of any/all boxes
xtalhps is the clock speed its in the cal file as its needed for the timer intervals for the timer table lookups and references
- 2023 Dec 16, 10:36
- Forum: RZASA - 03/04 Marauder
- Topic: What is the max RPM the EEC can run the engine?
- Replies: 1
- Views: 1240
Re: What is the max RPM the EEC can run the engine?
yeah no prob Ive taken them to 8600 no prob
- 2023 Dec 08, 23:09
- Forum: Hardware, Programming & Disassembly
- Topic: EEC V file conversion
- Replies: 369
- Views: 61794
Re: EEC V file conversion
No, you cant read an odd byte as a word. When you do you get the even word from 0x100. Its a shortcut.
- 2023 Dec 08, 23:06
- Forum: GUFX - 89-93 Foxbody ECUs
- Topic: Wide band
- Replies: 1
- Views: 1519
Re: Wide band
driver side usually runs leaner than the passenger
- 2023 Dec 08, 23:05
- Forum: PCM / ECU / EEC Tuning
- Topic: Looking for PYCL4 bin and xdf files
- Replies: 4
- Views: 1863
Re: Looking for PYCL4 bin and xdf files
Just post the file here no prob
- 2023 Dec 08, 11:02
- Forum: PCM / ECU / EEC Tuning
- Topic: Looking for PYCL4 bin and xdf files
- Replies: 4
- Views: 1863
Re: Looking for PYCL4 bin and xdf files
You have to be a premium member to request files to be created.
- 2023 Dec 06, 15:45
- Forum: PCM / ECU / EEC Tuning
- Topic: EQE3 pcm help
- Replies: 15
- Views: 9363
Re: EQE3 pcm help
Correct its the newest strategy for the them.
I wont be releasing an READ0 def til a premium member needs it. Thats how all my defs come to be. I make them when someone needs them and then post them freely to use.
The strategy doesnt matter on any ecu just the hardware code. Thats what the search box is for on the downloads page on the homepage. Many eec-v's are the same class and can be swapped.
I wont be releasing an READ0 def til a premium member needs it. Thats how all my defs come to be. I make them when someone needs them and then post them freely to use.
The strategy doesnt matter on any ecu just the hardware code. Thats what the search box is for on the downloads page on the homepage. Many eec-v's are the same class and can be swapped.
- 2023 Dec 03, 13:54
- Forum: Additional Support
- Topic: Using PCMFlash & Scanmatik 2 Pro to "write"
- Replies: 3
- Views: 2355
Re: Using PCMFlash & Scanmatik 2 Pro to "write"
They list as 216k cuz thats actually what it is rom wise, 224k includes ram and 256k contains all the filler for actual flat addressing. Its actually russian software.
They have to copyright the cal file a year before production so you will always see stock tunes being the year prior. Updates will come later like the 97 crown vic with the dealer flash update got a 2006 cal file.
Yeah it will run as you can damn near run anything on anything pretty much but its not ideal.
Other than the cam type, the different size injectors and that the OHV deletes 2nd gear they are pretty similar tunes. The SOHC will be neutered from the low timing running the OHV cal and fuel will be off probably 20% or more at idle. Interestingly enough they actually fuel very very closely up top.
This is comparing a SRE1 (SOHC) and LLA1 (OHV).
They have to copyright the cal file a year before production so you will always see stock tunes being the year prior. Updates will come later like the 97 crown vic with the dealer flash update got a 2006 cal file.
Yeah it will run as you can damn near run anything on anything pretty much but its not ideal.
Other than the cam type, the different size injectors and that the OHV deletes 2nd gear they are pretty similar tunes. The SOHC will be neutered from the low timing running the OHV cal and fuel will be off probably 20% or more at idle. Interestingly enough they actually fuel very very closely up top.
This is comparing a SRE1 (SOHC) and LLA1 (OHV).
- 2023 Dec 01, 17:48
- Forum: CRAI8 - 98 Fords (Most All)
- Topic: getting started
- Replies: 3
- Views: 2670
Re: getting started
you set your high speed fan and low speed fan temps to the same ??
you should never use a global spark adder unless your doing diagnostics, go ahead and set that back to 0.
FN2200 is the borderline knock table you can go add some timing in there if you wish.
FN2300A is the mbt spark table. You can use it as a reference to add some spark to fn2200.
You can see there's quite a bit that can be picked up down low but not much of anything up top.
But yeah you did an excellent job. Apparently you read as most people don't set the scaling percentage to 1 so all their values are jacked up when reading out a stock tune and going from there.
you should never use a global spark adder unless your doing diagnostics, go ahead and set that back to 0.
FN2200 is the borderline knock table you can go add some timing in there if you wish.
FN2300A is the mbt spark table. You can use it as a reference to add some spark to fn2200.
You can see there's quite a bit that can be picked up down low but not much of anything up top.
But yeah you did an excellent job. Apparently you read as most people don't set the scaling percentage to 1 so all their values are jacked up when reading out a stock tune and going from there.
- 2023 Dec 01, 17:40
- Forum: Hardware, Programming & Disassembly
- Topic: EEC V file conversion
- Replies: 369
- Views: 61794
Re: EEC V file conversion
no need to throw it away just have it as an option to not label args at the top of the directive
/done
/done