Search found 1858 matches
- 2023 Nov 29, 09:53
- Forum: RZASA - 03/04 Marauder
- Topic: Catalyst Temp Protection
- Replies: 4
- Views: 4700
- 2023 Nov 29, 09:51
- Forum: RZASA - 03/04 Marauder
- Topic: PERLOAD vs CL
- Replies: 9
- Views: 6878
Re: PERLOAD vs CL
my marauder tune is on the rzasa download page
- 2023 Nov 29, 09:48
- Forum: Speed Shop & Engine Talk
- Topic: In need of in-tank fuel pressure regulator
- Replies: 5
- Views: 3974
Re: In need of in-tank fuel pressure regulator
I take it your referring to one of these ? https://www.summitracing.com/parts/hly- ... 2731186257
It sounds like your pump voltage is set too high. You should be able to reduce it so you get no fuel pressure at key on if you wanted to.
It sounds like your pump voltage is set too high. You should be able to reduce it so you get no fuel pressure at key on if you wanted to.
- 2023 Nov 29, 09:31
- Forum: Additional Support
- Topic: New Tune and recommendations on supporting mods
- Replies: 22
- Views: 10797
Re: New Tune and recommendations on supporting mods
I'm not sure what your asking ?
- 2023 Nov 28, 21:36
- Forum: PCM / ECU / EEC Tuning
- Topic: Lopping at idle
- Replies: 13
- Views: 4185
Re: Lopping at idle
Well that obviously has nothing to do with the tps.
You obviously need more crank pw when hot.
Go kick up the crank pw at operating temp by 35%
You obviously need more crank pw when hot.
Go kick up the crank pw at operating temp by 35%
- 2023 Nov 28, 18:04
- Forum: PCM / ECU / EEC Tuning
- Topic: Lopping at idle
- Replies: 13
- Views: 4185
Re: Lopping at idle
even with the tps unplugged it would still start up
only possibility is that youve closed it too far and it cant get enough air
only possibility is that youve closed it too far and it cant get enough air
- 2023 Nov 28, 18:02
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: RPM Flare on Cold Start
- Replies: 4
- Views: 2013
Re: RPM Flare on Cold Start
Thats just a stock car it should run like stock.
Make sure your throttle stop is set correctly.
Read the idle air and dashpot write ups.
Make sure your throttle stop is set correctly.
Read the idle air and dashpot write ups.
- 2023 Nov 28, 10:31
- Forum: PCM / ECU / EEC Tuning
- Topic: Lopping at idle
- Replies: 13
- Views: 4185
Re: Lopping at idle
That's dashpot, info is on the homepage.
Sounds like you have some issues going on as that's not feasible.
Sounds like you have some issues going on as that's not feasible.
- 2023 Nov 27, 19:31
- Forum: Hardware, Programming & Disassembly
- Topic: Scanmatik 2 Pro & PCMFlash module #29 successful read
- Replies: 11
- Views: 3073
Re: Scanmatik 2 Pro & PCMFlash module #29 successful read
yeah you will need to swap the file back and forth.
- 2023 Nov 27, 15:05
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: RPM Flare on Cold Start
- Replies: 4
- Views: 2013
Re: RPM Flare on Cold Start
No, crank iscdc is only during cranking and key off, soon as it fires off it goes in to idle which is derived from idle air.
What all do you have done ?
What all do you have done ?