EFIDynoTuning Forum

Need injector info data for FIC 1200cc please... Thanks MB I am use Tuner pro RT

Thank you :)

92 fox body 347 CID running #30 injectors. I am using Tuner pro...
I'm going to switch my tune over to E85 fuel, I have a set of #42 injectors left over from my Lightning.

My question can I use one of the Injector Flow Data from your web site? If so which one? Or which injectors do you recommend I use for my combo?
Thank you
MB

One more question. So 96 load seems high for a N/A motor, should I try to bring my load closer to 80 load? And how would I do that? Or just leave it at that?
Thank you for your help.
MB

Ok so at 24-25 deg @90 % load there's still plenty of room for more timing. Correct?
Thanks

I have attached two screen shots.
One of FN904A pid the other my data log of my timing table pid in my tune.

Question One FN904A does not match my data log timing table. Not sure way (at 90% load) 5000 rpm

I set my base timing spot removed to 10 deg btdc

Question two does my timing table in my data log show actual timing? Or do I add 10deg to that number?
Please see screen shot
Thank you
MB.

Got it Works great thanks!
MB

I use to be able to view TQ and HP when logging
But some how lost it it just shows 0 now. When data logging now.

Any thoughts?
Thank you
MB

Hi I am a old member. I have re register bc I was unable to reset my pass word with my old username.
My question to you is there any way I can retrieve my old post? There was a lot of good information I would reference back to from time to time.
Thank you
MBSVT