EFIDynoTuning Forum

Yes. Picture attached higher.

256k bin open in tuner pro, insert vin amd pats after closed tuner pro was convrted to 224...with amz2 works

Hello. I tried write zYA2 into my mach1. After write complete(pcm flash), fuel pump ticking with ignition on. I tried identicication button in my pcm flash, pcm flash display error on vin and strategy, immo light on, radiator fan activate with ignition on, sym2 same problem but AMZ_stock, MGZT_stock works without problem. I only insert vin and pats code into all bins.I was not tried start car...
Attached picture from amz2 write...on zya2 is ERROR status at strategy and vin location...

Thanks sooo much to DECIPHA for mach bins

Only idle rpm and timing idle need adjust.

Same. Stock engine only comp cams, xpipe. Car run without problems with stock ecu.

bad86capri wrote: ↑2022 Nov 26, 17:13 If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!

I have relatively stock car, only need adjust some parameters, maybe FBFG2 strategy works on our cars, not actual but for some adjust could by done but FBFG2 can not find too...maybe somebody still have FBFG2 in laptop?

Hello guys. I have 03 mach1, need tune my pcm. Have anyone stock 03 mach1 binary converted to FBGI0 please? I dont have FBFG2 strategy for RYAK1 in tuner pro, ryak1 not properly displayed parameters with FBGI0.