Search found 6 matches

Return to advanced search

Re: qh issue with tunerpro on a lb3 ecu

decipha wrote:no big deal when i get some free time i'll toss it in there


I don't suppose you've had the time to get to this?
by oharris
Fri Jul 06, 2018 7:14 am
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Re: qh issue with tunerpro on a lb3 ecu

no thats incorrect, simply click on xdf >> view/edit xdf header info >> set the base offset to 2000 and click subtract I tried that. It worked fine as far as the xdf was concerned. I was able to read and edit the bin and it had reasonable values. When I tried to write the bin to the QH, it didn't w...
by oharris
Fri Jun 08, 2018 10:04 am
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Re: qh issue with tunerpro on a lb3 ecu

Thanks decipha. I take it you have to do something to the xdf to make this happen or are you modifying the adx? In the mean time I think I've managed to solve the original problem. It seems BE has the ability to place the tune wherever you specify. ie. starting at x2000 (8K). Tuner Pro seems to lack...
by oharris
Fri Jun 08, 2018 7:13 am
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Re: qh issue with tunerpro on a lb3 ecu

same as any strat, just add in the jump and order the payloads Now you've lost me. Add in the jump? What is that? Order the payloads? I assume that's picking the things you want to log (LAMSE, spark advance, RPM, etc.) Is that correct? I tried following your instructions on this page but I'm stumpe...
by oharris
Thu Jun 07, 2018 6:49 pm
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Re: qh issue with tunerpro on a lb3 ecu

with the egr input open it seems like the best method would be to just use either a maf sensor or a map sensor (voltage based) to make it pretty straight forward. A few years back I started going through one of the svo/turbocouple strats can't remember which i thin it was an la file but in any case...
by oharris
Wed Jun 06, 2018 7:44 pm
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Re: qh issue with tunerpro on a lb3 ecu

ok so this is on my 1986 turbocoupes, so i swapped my pc1 and small vam to a lb3 and large vam, did the pin swap got it together and it runs great so far. so i put the quarterhorse on it, i downloaded the la3bin from eecanalyzer.net(only place i found any of the 2.3t bins) and loaded it into the QH...
by oharris
Wed Jun 06, 2018 5:44 am
 
Forum: SVO & TurboCoupe Tuning
Topic: qh issue with tunerpro on a lb3 ecu
Replies: 51
Views: 10522

Return to advanced search