Search found 313 matches

by wwhite
2024 Mar 23, 20:02
Forum: Additional Support
Topic: Marine definition
Replies: 20
Views: 6555

Re: Marine definition

Sweet, thanks, downloaded!
I live at sea level, might put a 351 in a boat one day.
I'll continue tinkering with these.
by wwhite
2024 Mar 15, 08:35
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

Nope, not for OBD1 as far as I know.
Original for older EEC-III units, and some EEC-V, as far as I know.

The 28oz balancers with a 4 point miss-fire ring were on some 1981 302s, and some 1981-?? 351w, part number E1TE-C3A
Then some 1996 351w E series and F series, mostly California I believe had the same 28oz balancer with the miss-fire 4-point ring, part number F6TE-JA.
by wwhite
2024 Mar 14, 11:37
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

Used, E1TE-C3A, listed on eBay as a E1TA.
Just got another F6TA-JA, very hard to find.
by wwhite
2024 Mar 11, 10:49
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

Just a picture of what I’m working with.
IMG_1306.jpeg
IMG_1307.jpeg
by wwhite
2024 Mar 06, 17:05
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

I’m going to get it pressed on perfectly to avoid having a custom adjustable bracket, once and done.
by wwhite
2024 Mar 05, 16:26
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

Yes, but my 36-1 wheel is on the backside of the balancer, and does not require a custom mount for the sensor.
by wwhite
2024 Mar 04, 10:23
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

I picked up an 1981 28oz balancer that had a 4-point ring, same as the California 1996 351w 28oz, very rare and hard to find part. The diameter of the 4-point ring is exactly like the explorer 36-1 wheel.
I used a 96-01 stock balancer, stuck it in the freezer overnight, and popped of the trigger wheel with a couple of pry bars.

The big difference is the truck serpentine pulley has four holes to bolt to the four holes on balancer. All or most 28oz balancers only have 3.

I’ve been searching for this set up for two years.

I’ll post pictures this weekend as I get it all assembled.
by wwhite
2024 Mar 03, 22:58
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

Nope, this is a 1994 351w, all truck front dress, reverse rotation water pump.
The only thing from the explorer is the 36-1 wheel.
All other parts, sensor, pigtails, etc. brand new.
The timing cover is a Dorman 635100.
by wwhite
2024 Mar 03, 15:27
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

ATPCR wrote: 2024 Mar 03, 12:14 wwhite's picture looks like the Explorer timing chain & gears cover.
Correct, I have a brand new one.
Using a 28oz balancer that had the 4 point star(misfire ring), and 36-1 wheel from an explorer 50oz balancer.

I’ve pressed off both rings, ready to press on 36-1 wheel onto 28oz balancer, just needs to be perfectly aligned as there will be no adjustment after wards.
by wwhite
2024 Mar 01, 17:02
Forum: Speed Shop & Engine Talk
Topic: 351w 36-1 alignment
Replies: 22
Views: 881

Re: 351w 36-1 alignment

So, with the VR sensor mounted, fixed, crank at TDC, the wheel need to be mounted on balancer at where the VR is directly over the whole tooth, 5 teeth before the missing tooth? Is that correct.

Of course timing pointer would also be at 0 degrees on balancer.

First time doing this setup, hope my question makes sense.