Search found 73 matches

Return to advanced search

moates QH x3 forsale

I have 2 moates QH's for sale. I'd like 125.00 apiece plus the ride.
by wywindsor
Sat Jul 28, 2018 8:32 pm
 
Forum: For Sale / Wanted
Topic: moates QH x3 forsale
Replies: 0
Views: 127

eec's for sale

2 Tm40's
1 X3Z

I'd like 125 apiece for the tm4o and 200 for the x3z.

Thanks Ray
by wywindsor
Thu Jul 26, 2018 10:05 pm
 
Forum: For Sale / Wanted
Topic: eec's for sale
Replies: 0
Views: 75

FRPP coyote tables

First off Is it the same as the blue oval in your car. Can anyone provide the tables and multipliers for timing and fueling VS> the stock ones. I have heard thru the grape vine the coyote stock heads up racing the timing is locked at 25 degrees. The rules say the tube size and maf sensor shall be st...
by wywindsor
Wed Apr 04, 2018 4:47 pm
 
Forum: The Range
Topic: FRPP coyote tables
Replies: 1
Views: 287

meth inj.

So what is the right way to tune for this. I read where snow only wants your IAT's to add timing. I also read where others say to jet the nozzle for best performance. What mixture to run and so on. Whats your thoughts. Here is what I do on 91 pump gas. My timing table I add 6 to 8 degree;s of timing...
by wywindsor
Sat Feb 18, 2017 6:30 pm
 
Forum: Alternate Fuel Tuning
Topic: meth inj.
Replies: 1
Views: 713

jmod vs transgo

Here is a write up from Jerry on tcoaa I read where the transgo kit was the shit. I bought the transgo after reading the tcoaa write up but now I have my doubts. Which would you do? I want this bitch to shift hard at wot and firm down low.
by wywindsor
Thu Aug 18, 2016 10:49 pm
 
Forum: The Range
Topic: jmod vs transgo
Replies: 2
Views: 1042

fbfg2 tunerprort

Well as usual I am lost. I have tuner pro downloaded. I believe I have fbfg2 downloaded in more forms than I can imagine. And I have no idea where to to download sym3. I'm sure the I have something backwards As usuall. Give me a call when you get a chance.
by wywindsor
Mon Jan 25, 2016 10:09 pm
 
Forum: EEC-V & SN95 Tuning
Topic: fbfg2 tunerprort
Replies: 1
Views: 581

AMZ3 Tune ?s

Well I believe I'm to the point of write or up load tune to the qh. I have the following ?s

Do I have to download the current tune to the laptop?
What If I have a different tune in the qh from stock?
Can I load AMZ3 and look at it first?
by wywindsor
Mon Dec 21, 2015 8:07 pm
 
Forum: EEC-V & SN95 Tuning
Topic: AMZ3 Tune ?s
Replies: 1
Views: 872

water meth o2 sensor

Quick question. Will water meth inj. kill your wideband sensor?
by wywindsor
Sun Dec 13, 2015 10:30 pm
 
Forum: The Range
Topic: water meth o2 sensor
Replies: 1
Views: 796

Rape a tune from the ecc

If some one has a tune from diablo or sct can one hook up a qh and read this tune?
by wywindsor
Tue Oct 06, 2015 5:41 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Rape a tune from the ecc
Replies: 1
Views: 657

Torque management

Is there any reason to not to eliminate this? I don't make the power the trans can handle and I'm looking for pretty much all out performance. If so is there one function that will delete this?

What is the performance trans sw on the rvaf1/nux1?
by wywindsor
Tue Aug 18, 2015 9:00 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Torque management
Replies: 1
Views: 644

Lets scare the hell out of decipha

Don't have time to post the tune tonight as it is on the other computer. But if you read my sig and where I'm from what would be your guess for my afr and timing. decipha might want to kick my rear for where I have the tune but it works for now. I have a lot of blow by and run the car at 4950' with ...
by wywindsor
Thu Jul 16, 2015 10:53 pm
 
Forum: Foxbody Tuning
Topic: Lets scare the hell out of decipha
Replies: 1
Views: 656

rvaf1 vs fbfg2

So what is the difference. if the fbfg2 is superior to the rvaf1 why did Adam botch the whole thing ? I'm kinda pissed at the rvaf1 as it is incomplete for the most part as far as definitions are concerned for each parameter. it has a performance transmission parameters but who the hell knows how to...
by wywindsor
Thu Jul 16, 2015 10:44 pm
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 vs fbfg2
Replies: 1
Views: 610

stalsw ?

What would this be called in the rvaf1 strat from pops?
by wywindsor
Sun May 31, 2015 6:32 am
 
Forum: EEC-V & SN95 Tuning
Topic: stalsw ?
Replies: 1
Views: 688

Re: finding or identifying FN parameter

Not trying to use one editor against the other. Just looking for parameters. The pid legend in 2010 shows pid: fuction, scaler and table numbers. I suppose be2012 does not, or the strategy was not complete to provide this. Mike in your write up on idle fuel enrichment you refer to fn1361 62 and 60. ...
by wywindsor
Tue May 19, 2015 7:13 pm
 
Forum: EEC-V & SN95 Tuning
Topic: finding or identifying FN parameter
Replies: 3
Views: 1063

finding or identifying FN parameter

I have B.E 2012 and 2010. I need to look at 2010 as i believe the parameters are identified. On 2012 they are not or I don't know how to identify say fn1361. Where does one lookfor this. I also believe you could type this in the find in 2010 and it would come up with it. 2012 it will not.
by wywindsor
Tue May 19, 2015 5:20 pm
 
Forum: EEC-V & SN95 Tuning
Topic: finding or identifying FN parameter
Replies: 3
Views: 1063

Re: rvaf1 nux1 tune help

This thing is still kicking my butt. Have to head to work to start a 3 day turn around. 12 hours a day. I changed a bunch of stuff and the car will start if she catches sometimes. If not I can pedal her and she goes to high idle. I changed the multiplier at 60 degrees and und x 2 and she fired the f...
by wywindsor
Tue May 19, 2015 6:30 am
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

Re: rvaf1 nux1 tune help

Yeah I changed inj. and for got to plug all of them back in. Need to close the garage when i work as I get side tracked when people come over. I have anew problem. I have the fuel dialed in when she is warm pretty good. But getting her to start is a bitch. I set the isc by removing the conn. to it a...
by wywindsor
Mon May 18, 2015 8:56 am
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

my junk at 5028'

So over the last few years Dechipha has helped me tremendously. my combo seems alright but different to the internet hype. I have the combo in my sig that don't cooperate all the time. the calculation s say 147# of cranking compression per the net with elevation correction. I get 127 and no leak dow...
by wywindsor
Sun May 17, 2015 6:09 pm
 
Forum: Racing & Dyno Results
Topic: my junk at 5028'
Replies: 2
Views: 1315

Re: rvaf1 nux1 tune help

Sometimes I have my head up my as when tuning. All is good so far after I fixed a major fuck up.
by wywindsor
Thu May 14, 2015 9:07 pm
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

Re: rvaf1 nux1 tune help

alosl 63.1872

ahisl 60.2676

breakpoint .0000336300

min pulse 1.391

batt

6 2.95
8 1.441
10 .921
11 .758
12 .636
13 .518
14 .409
15 .312
by wywindsor
Thu May 14, 2015 6:23 am
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

Re: rvaf1 nux1 tune help

I only drove her a short ways with both mafs. 1k thru 3k rpm. This was with the supercharger that she was a bit lean. I corrected both back to about 14.7 I need to get he on the highway in drive for better logs. The min pulse is 1.391 from seimens web page. the inj. were purchased from power adder s...
by wywindsor
Wed May 13, 2015 10:11 pm
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

Re: rvaf1 nux1 tune help

Dang isn't late for you to be on the net.
by wywindsor
Wed May 13, 2015 10:03 pm
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

rvaf1 nux1 tune help

So here's the story. I have a 2001 mustang with the above strategy. I have 60# siemens inj. a 3'' pmas maf and a p1 supercharger. I set all the parameters according to lasotas book for tuning. Meaning turn off all the adaptive shit and set the fueling to 14.7. I left the stock maf and inj. in her to...
by wywindsor
Wed May 13, 2015 8:53 pm
 
Forum: EEC-V & SN95 Tuning
Topic: rvaf1 nux1 tune help
Replies: 12
Views: 2668

RVAF1 to CDAN4

Is the pin out the same? And will the strategy support the transmission. This seems like a cheaper way to tune the 2001 mustang.
by wywindsor
Wed Feb 18, 2015 10:58 pm
 
Forum: EEC-V & SN95 Tuning
Topic: RVAF1 to CDAN4
Replies: 2
Views: 834

Will these strategies mix

I went to eec analyzer and found RVAF3,RVAFB,RVAF0,RYAK1 downloads. Can I use one of these for RVAF1. I read on another thread here that Derek may be working on a CVAF1 that would tune all these. I emailed him and he his currently not working on this. Even if I can't data log with this I have a pred...
by wywindsor
Sat Jan 31, 2015 4:55 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Will these strategies mix
Replies: 1
Views: 720

Re: CVAF1 - COMPLETE definition file for QH

Count me in. Sooner the better. Any Idea when this will be available?
by wywindsor
Wed Jan 28, 2015 10:38 pm
 
Forum: EEC-V & SN95 Tuning
Topic: CVAF1 - COMPLETE definition file for QH
Replies: 29
Views: 10000

Re: afr lean ?

thanks
by wywindsor
Fri Jan 23, 2015 9:54 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

Re: afr lean ?

How does one go about using the 4 bank def to extract the strategy. Do I need to user the Qh or use a usb to obII. If I need the usb to obII where does on get it.
by wywindsor
Fri Jan 23, 2015 4:55 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

Re: afr lean ?

That would be grand. I assume it will work with a QH, will it work without one? I changed inj. back to the stock 19# and the original maf. She runs fine now. I'm sure the tune was screwed. I want to use the pmas I bought, but need to send it in for a recal. This should give me time to break in the c...
by wywindsor
Thu Jan 22, 2015 6:24 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

Re: afr lean ?

Thanks, Didn't know I could do that. I went and logged it and she is lean for sure. I need to ck. the maf and clean it. I will have to get the blue car out to rob the QH out of it. my street is full of ice, so it might be awhile. I'm still going to buy the tuning stuff to tune with. Idea's.
by wywindsor
Tue Jan 20, 2015 8:48 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

Re: afr lean ?

I need to buy the strategy and the dongle as well as B.E. 2012. I can log it with the diablosport and post a pic. Will be buying new tuning software soon. Got any Idea's on where to get the strategy and still use BE 2010. and a qh.
by wywindsor
Tue Jan 20, 2015 6:26 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

Re: afr lean ?

The wide band reads 14.5 to 15.1 in closed loop at idle and up to cruise rpm 2250 or so at 70 mph. I'm not sure as to where open loop comes in as I just found it on the diablosport prerdator. need to go test this one. I'm pretty sure it's all in the open loop fueling. I will check the narrow bands a...
by wywindsor
Mon Jan 19, 2015 4:54 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

afr lean ?

So I re built the wife a 4.6. Nothing special, just forged internal aluminum block 2v. I decided to break it in without the p1sc supercharger. Runs fine, but is lean on top end. 18 to 19 afr. My wideband could be screwed, I don't think I have any ex. leaks. fuel pressure is 38 to 40 psi. I know I ne...
by wywindsor
Sun Jan 18, 2015 8:04 pm
 
Forum: EEC-V & SN95 Tuning
Topic: afr lean ?
Replies: 11
Views: 3102

afr on the transbrake

Where should my afr's be? As well as the timing. Car is my in my sig.
by wywindsor
Tue Jul 22, 2014 6:32 am
 
Forum: Foxbody Tuning
Topic: afr on the transbrake
Replies: 1
Views: 541

Tuning for e85

Well it's time for the change. I want to run e85 for the first time and haven't found the info I would like. Some say to add 20% more fuel in the normal driving area and 40% up top. Should this be in the fueling table only? Pw vs ect need changed on start up changes if any. what would you use for th...
by wywindsor
Sun Jun 08, 2014 8:52 am
 
Forum: Foxbody Tuning
Topic: Tuning for e85
Replies: 3
Views: 925

breakpoint/hi and low slope 80#

Here is the data I found for siemens 80# inj. Can you show me what a the formulas to convert these to hi and low numbers and the breakpoint B.E. wants> Well the pdf won't load.

AOLSH (lb/s) .028123
AHISL (lb/s) .020877
FUEL-BKPT .0000242100
by wywindsor
Mon Mar 10, 2014 5:43 pm
 
Forum: Foxbody Tuning
Topic: breakpoint/hi and low slope 80#
Replies: 4
Views: 1284

Pro m eec

So I was at the local speed shop today and had the owner tell me that pro m purchased 375 eec units along with fords order. He also told me they were the same as the new mustang eec. He has pro m software for there new eec and says he can tune the new fords with it that all eec are now the same. Any...
by wywindsor
Sun Feb 09, 2014 2:55 pm
 
Forum: ECU Discussions
Topic: Pro m eec
Replies: 1
Views: 1377

Innovate wideband mtx-l

I have the old lc2 with the wiring nightmare. It works fine but is a mess to wire. I bought the mtx-l for the 2001 gt and what a dream to install and calibrate. Most of the wiring is [plug and play]. The only wiring needed is a Grd,switched ing. and lighting. You can use the yell for 0 to 5 vdc or t...
by wywindsor
Thu Jan 23, 2014 11:57 pm
 
Forum: Reviews, Compliments & Complaints
Topic: Innovate wideband mtx-l
Replies: 0
Views: 1130

pmas mh 30 ?

I bought a pmas hpx protube mh 30 maf. The product looks great but came without a maf curve. The site says each comes with it. I went to the pdf for the curve and entered the inside diameter of the tube. It did not match the Kg/Hr per the voltage. Is there a one for all curve or soes each maf have i...
by wywindsor
Fri Jan 17, 2014 11:17 pm
 
Forum: EEC-V & SN95 Tuning
Topic: pmas mh 30 ?
Replies: 2
Views: 1042
Next

Return to advanced search