Search found 18 matches

by motorhead1991
2022 Aug 04, 02:44
Forum: Hardware, Programming & Disassembly
Topic: ford box code strategy cross reference
Replies: 10
Views: 5336

Re: ford box code strategy cross reference

I'd be happy to add whatever you like to OpenEEC as well as add you to it.
by motorhead1991
2022 Jan 11, 15:31
Forum: PCM / ECU / EEC Tuning
Topic: [MA35C] 90-92 Ford Ranger 2.3 and 4.0
Replies: 2
Views: 2891

Re: [MA35C] 90-92 Ford Ranger 2.3 and 4.0

tufgriz wrote: โ†‘2022 Jan 10, 21:53 any luck on a 1993 ranger RAT1 with I believe Strategy W2E1 Havent been able to find anything anywhere as of yet
I don't have that one, but I do have one for a 94. I can't remember which bin it was though.

EDIT: upon further digging, I believe I only have the 2.3 and 3.0 bins if that vintage. If you can get me a copy of your ECU I could probably whip something up.
by motorhead1991
2021 Dec 12, 01:11
Forum: PCM / ECU / EEC Tuning
Topic: [MA35C] 90-92 Ford Ranger 2.3 and 4.0
Replies: 2
Views: 2891

[MA35C] 90-92 Ford Ranger 2.3 and 4.0

So, I was able to unify the 2.3 and 4.0 strategy under the MA35C board family. These two have some small differences but everything else matches.

I utilized the "visibility level" feature built into TunerPro to expose the necessary differences. Datalogging should work on the 4.0 with Decipha's 11/9/17 ADX that I provided. I will get around to updating the patch code eventually, but I know this works fine.

"Show All" does just that. It looks chaotic.
"Level 1" visibility is for the 2.3 specific stuff.
"Level 2" exposes the 4.0 stuff.

I built this around m0m2 and X0A respectivelty. The 3.0 "X1L" is far too different, and I'm working on a strategy for that.
by motorhead1991
2021 Dec 09, 17:18
Forum: Hardware, Programming & Disassembly
Topic: Easy way to create xdf files
Replies: 2
Views: 1805

Re: Easy way to create xdf files

SAD806x has a utility to export to an XDF but you'll have to organize it all manually. I don't remember if it can also do the equations and stuff though
by motorhead1991
2021 Apr 26, 17:43
Forum: Speed Shop & Engine Talk
Topic: EEC IV Test Box
Replies: 7
Views: 4227

Re: EEC IV Test Box

I use a Bowling & Grippo JimStim. It also works to power my OBD2 flashing jig.
by motorhead1991
2021 Apr 01, 23:15
Forum: Hardware, Programming & Disassembly
Topic: EEV-IV-disaasember SAD source code
Replies: 2
Views: 2533

Re: EEV-IV-disaasember SAD source code

Send him a PM. I haven't talked with him in a while myself.
by motorhead1991
2021 Mar 22, 00:36
Forum: Speed Shop & Engine Talk
Topic: And on the subject of EEC terminals...
Replies: 16
Views: 12368

Re: And on the subject of EEC terminals...

EEC-IV uses a 0.080/2mm pin, I haven't found a suitable replacement yet. We (OpenEEC) did make an interesting discovery for EEC-V though ๐Ÿ˜.
by motorhead1991
2021 Mar 16, 23:26
Forum: Speed Shop & Engine Talk
Topic: And on the subject of EEC terminals...
Replies: 16
Views: 12368

Re: And on the subject of EEC terminals...

danielt wrote: โ†‘2021 Mar 16, 23:14 These are for the EEC-IV 60 pin plug.
Male terminals:
https://www.clipsandfasteners.com/Wedge ... a14887.htm

Female terminals:
https://www.clipsandfasteners.com/Wedge ... a14888.htm

The EEC-V plug is smaller diameter. The same company sells both.

Regards,
Daniel
Those are the .110 pins, not the .060.

EEC-V uses an 0.040 size pin IIRC.
by motorhead1991
2021 Mar 09, 23:33
Forum: FBGI0 - 02-04 Mustangs (ALL)
Topic: Stock ECU Clone?
Replies: 15
Views: 9398

Re: Stock ECU Clone?

9 times out of 10, the Burn2 can do it without powering the ECU.
by motorhead1991
2021 Mar 08, 13:15
Forum: Hardware, Programming & Disassembly
Topic: Stock ECU Closed Loop Wideband Control
Replies: 28
Views: 15541

Re: Stock ECU Closed Loop Wideband Control

Now we just need to use the EGR solenoid output for boost control ๐Ÿ˜‰