EFIDynoTuning Forum

I think it was a challenge with BNE, and Clint has made updates yesterday.

I have a question about setting the PSIBRM. Im logging at idle .0210, and it will sometimes fall all the way into the -.0125 range. Idle rpm is spot on 775-815, and Im commanding 800 in NUBASE. I read where it says if the PSIBRM is greater than .0500, then slightly open the tb. If the value is 0 and the idle is too high when compared to NUBASE, then slightly close the tb. As long as my idle is spot on, and my PSIBRM is between .0125 and .0210, then Im good to go, or it cant drop below .000? Also, I have zeroed out all that ws on the list and followed it to a T, but Im still logging ISCDC of 12-17 ata steady 800 rpm idle. Is this how its suppose to be? Thanks!

Looks like it wasnt "Signed."

Im attempting to set up a "Mechanical Idle" tune for my Foxbody. When I datalog IPSIBR, I get .055 and it falls all the way to 0, but then it continues tom drop, I assume, and displays 15.99! Then it will drop to 15.98, 15.97, 15.96, etc........I logged it long enough to see it fall to 15.750. WHy am I logging numbers outside of the min and max values? Thanks for the advice!