Search found 143 matches

Return to advanced search

Re: Universal ADX Logging slow above 5500 RPM

Yes, I will definitely be starting from scratch on a base tune. Sorry I prolly should have explained that a lil better and didn't mean use his actual tune. lol I have been reading thru everything over the past couple weeks to hold down on all the upcoming questions that could possibly make me sound ...
by bunso
Tue Jan 16, 2018 10:00 am
 
Forum: EEC-V & SN95 Tuning
Topic: Universal ADX Logging slow above 5500 RPM
Replies: 8
Views: 893

Re: Universal ADX Logging slow above 5500 RPM

Was gonna ask you about one for a PTP2 ecu. Its an 04 Mustang Auto car. I wont be using the auto functions. I still about a month out on firing her up but Im gonna try tuning this one myself and wanted to go ahead and start on the tune. Since mine and Coris car (that you tuned) are both 99-04 I was ...
by bunso
Sun Jan 14, 2018 9:11 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Universal ADX Logging slow above 5500 RPM
Replies: 8
Views: 893

Re: Universal ADX Logging slow above 5500 RPM

One of yours for an 04 GT. Was also gonna use it on Coris car
by bunso
Sun Jan 14, 2018 4:44 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Universal ADX Logging slow above 5500 RPM
Replies: 8
Views: 893

Re: Universal ADX Logging slow above 5500 RPM

Thanks, yes please do.
by bunso
Sun Jan 14, 2018 2:44 pm
 
Forum: EEC-V & SN95 Tuning
Topic: Universal ADX Logging slow above 5500 RPM
Replies: 8
Views: 893

Universal ADX Logging slow above 5500 RPM

Just like the subject states, has anyone else had this issue?
by bunso
Sun Jan 14, 2018 9:44 am
 
Forum: EEC-V & SN95 Tuning
Topic: Universal ADX Logging slow above 5500 RPM
Replies: 8
Views: 893

6R80 Swap

Has anyone had success doing a 6R80 swap into a new edge car? I see Shrader Performance sells a manual for the swap but curious to know if anyone else has had success.
by bunso
Tue Sep 12, 2017 7:35 am
 
Forum: EEC-V & SN95 Tuning
Topic: 6R80 Swap
Replies: 0
Views: 445

Re: (2011 GT) VCT's not changing

For anyone chasing an issue like this the verdict ended up being one of the plugs in the end of the head pushed out and the oil pressure was too low in the heads for the phasers to work properly. The oil pressure switch on these cars are below the heads so it showed great oil pressure which made it ...
by bunso
Fri Aug 04, 2017 2:04 pm
 
Forum: CAN Tuning
Topic: (2011 GT) VCT's not changing
Replies: 2
Views: 800

(2011 GT) VCT's not changing

I recently built a coyote for a buddy and his tuner is complaining about the cams not moving on the log. The VCT's on the log stay at or around 0. It has thrown a code once Po0012 for itake camshaft overadvanced. The car runs pretty damn good even with this issue. It's really hard to believe that it...
by bunso
Wed Apr 26, 2017 6:13 pm
 
Forum: CAN Tuning
Topic: (2011 GT) VCT's not changing
Replies: 2
Views: 800

RHS Part#35015

Up for sale is a set of 180cc RHS heads Part #35015. I had plans of slappin these on my 302 but plans have changed. Plans are to sell these and invest in an aftermarket block to build. As you can see these are brand new in the box and never been mounted. I ordered the heads naked but have all the pa...
by bunso
Fri Jan 20, 2017 8:10 pm
 
Forum: For Sale / Wanted
Topic: RHS Part#35015
Replies: 0
Views: 607

Re: Datalogging Through EGR Input - BE 2012

Just curios to know if logging the WB will work through the EGR on a 2000 GT like the foxbodies?
by bunso
Tue Jan 17, 2017 7:16 pm
 
Forum: Binary Editor / EEC Analyzer
Topic: Datalogging Through EGR Input - BE 2012
Replies: 21
Views: 8308

Re: 2013 Procharged V6 (IAT Relocate)

Appreciate it man
by bunso
Sun Oct 23, 2016 8:42 pm
 
Forum: CAN Tuning
Topic: 2013 Procharged V6 (IAT Relocate)
Replies: 6
Views: 2022

Re: 2013 Procharged V6 (IAT Relocate)

Hey Mike would you happen to have a wire diagram for a 2013 Mustang V6 car? I have searched the web high and low coming up short. Once I think that I have found the correct one it doesn't match up 100%. This car has the factory MAF sensor but it was moved to the intercooler when the blower was put o...
by bunso
Sun Oct 23, 2016 9:55 am
 
Forum: CAN Tuning
Topic: 2013 Procharged V6 (IAT Relocate)
Replies: 6
Views: 2022

Re: 2013 Procharged V6 (IAT Relocate)

Cool, Thanks. Kinda figured it would be but wanted to make sure. This little ole v6 will move. Consistent 11.40's. Hurt a ton of feelings around here. Lol
by bunso
Tue Oct 11, 2016 7:50 pm
 
Forum: CAN Tuning
Topic: 2013 Procharged V6 (IAT Relocate)
Replies: 6
Views: 2022

2013 Procharged V6 (IAT Relocate)

I recently installed a P1 Procharger on a buddies V6 Mustang but I'm having issues with IAT's through the roof. We added Meth but need to seperate the IAT sensor from the MAF and relocate closer to the throttle body after the meth nozzle. Question is what are you all using on these newer cars for an...
by bunso
Tue Oct 11, 2016 12:53 pm
 
Forum: CAN Tuning
Topic: 2013 Procharged V6 (IAT Relocate)
Replies: 6
Views: 2022

Re: 400 Member Milestone!

Job well done!
by bunso
Sun Aug 14, 2016 6:22 pm
 
Forum: The Range
Topic: 400 Member Milestone!
Replies: 9
Views: 2884

Re: Should I change anything?

That's what I was thinking! Not sure if I am ready for 14psi But maybe bump up to 9-10 for now. The motor is a stock bottom end but the heads are lock wired And ARP hardware just not sure if they are studded or bolts ( done 15 years ago by modern mustang ). When would I need to thank about meth inj...
by bunso
Sat Jul 16, 2016 10:01 pm
 
Forum: Foxbody Tuning
Topic: Should I change anything?
Replies: 6
Views: 1058

Re: Should I change anything?

Dont fear the boost. Crank it up! Nice to see a fellow Memphian on here
by bunso
Sat Jul 16, 2016 3:26 pm
 
Forum: Foxbody Tuning
Topic: Should I change anything?
Replies: 6
Views: 1058

ESAB Rebel

Just purchased one of these welders and its amazing! For the price you just can't beat it.
by bunso
Thu Jun 02, 2016 9:53 am
 
Forum: Reviews, Compliments & Complaints
Topic: ESAB Rebel
Replies: 0
Views: 658

Re: Hattiesburg, Laurel, Petal, MS - mississippi for the wee

If your ever in the Memphis, TN area hit me up.
by bunso
Wed May 25, 2016 6:12 pm
 
Forum: The Range
Topic: Hattiesburg, Laurel, Petal, MS - mississippi for the week
Replies: 2
Views: 1064

Re: Help deciding on new car to buy

New vehicle prices are indeed fucking insane. A few months ago I was truck shopping and wanted a brand new truck. Needless to say it didn't take me long to decide on going used. $40k for a damn truck aint happening, and that wasn't even loaded.
by bunso
Wed May 25, 2016 6:00 pm
 
Forum: The Range
Topic: Help deciding on new car to buy
Replies: 5
Views: 1370

Re: First time out with the turbo setup

The was not the latest tune you sent me where we bumped up the ACT limits. On these passes Im not sure the Meth even come on honestly. Im on my phone so I dont have the latest logs onhand but its the last 2 logs in my tune section
by bunso
Thu Apr 07, 2016 3:50 pm
 
Forum: Racing & Dyno Results
Topic: First time out with the turbo setup
Replies: 2
Views: 862

First time out with the turbo setup

This is my first time out with the new setup. I got some tweakin to do on her to get some more mph on the big end. Went 10.92 @117mph with a 1.4 60ft. She's a monster through the 1/8th but kinda slows down on the big end. I'm new to the turbo game so I will do some figuring and get some more mph out...
by bunso
Thu Apr 07, 2016 10:30 am
 
Forum: Racing & Dyno Results
Topic: First time out with the turbo setup
Replies: 2
Views: 862

Re: hey. Bunso!

Here ya go. Like I said nothing fancy goin on here.

This is a 351 kit on a 302 based block. Everything is listed in my signature as far as specs on everything
by bunso
Sun Mar 20, 2016 4:47 pm
 
Forum: Foxbody Tuning
Topic: hey. Bunso!
Replies: 5
Views: 1134

Re: hey. Bunso!

Hey man my bad. I will pull her out in the sun tomorrow so I can get some good pics. I would take them now but my garage is a lil dark and they wont look to great. I have been bowed up lately with work and haven't even thought about the car since Decipha tuned it over a month ago. What areas do you ...
by bunso
Sat Mar 19, 2016 6:55 pm
 
Forum: Foxbody Tuning
Topic: hey. Bunso!
Replies: 5
Views: 1134

Re: hey. Bunso!

Hey sorry I was just scrolling thru this section and saw my name in the title. lol

I can snap some pictures later tonight but its really nothing fancier than what you will find in the google searches online honestly
by bunso
Mon Feb 29, 2016 9:00 am
 
Forum: Foxbody Tuning
Topic: hey. Bunso!
Replies: 5
Views: 1134

Re: SeaDoo Jetski Turbo

I know this is an older thread but I stumbled across a thread on TURBOFORUMS.COM that has done this. When I have somemore time I will try to hunt it down and paste the link
by bunso
Fri Feb 26, 2016 7:59 pm
 
Forum: Marine Engine Tuning
Topic: SeaDoo Jetski Turbo
Replies: 1
Views: 2464

Re: Stuck in O/L

Is your spout connector in? Sounds like its not
by bunso
Thu Feb 11, 2016 6:53 pm
 
Forum: Foxbody Tuning
Topic: Stuck in O/L
Replies: 13
Views: 2036

Re: Stuck in O/L

Im not familiar with Tunerpro enough to know honestly sorry.

Whenever Decipha gets tired of lookin at titties from Mardi Gras down there he'll chime in. Lol
by bunso
Thu Feb 11, 2016 2:16 pm
 
Forum: Foxbody Tuning
Topic: Stuck in O/L
Replies: 13
Views: 2036

Re: Stuck in O/L

I have done something similar like this before. What I ended up doing was download a new A9L2 and use the "Compare Tune" option in BE and it will show the differences in the tune to see what has been changed.
by bunso
Thu Feb 11, 2016 11:58 am
 
Forum: Foxbody Tuning
Topic: Stuck in O/L
Replies: 13
Views: 2036

Re: 1993 Mustang GT has a chip slammed in the rear of the PC

Wow Motorvation is litterally 3 miles from my house. A buddy of mine is good friends with the owner ( TJ Tracy). I know that doesnt help much here but I never thought I would see anything Motorvation related on here.
by bunso
Sat Feb 06, 2016 3:45 pm
 
Forum: Foxbody Tuning
Topic: 1993 Mustang GT has a chip slammed in the rear of the PCM
Replies: 79
Views: 7991

A+++ Customer Svc @ Moates

Huge shoutout to Moates for awesome customer svc. I contacted Dave @ Moates in regards to a Quarterhorse with a dead battery on Tuesday and needing an RMA to have the battery replaced. Here it is Saturday and they have already sent me a brand new one now with a battery setup that you can replace on ...
by bunso
Sat Jan 30, 2016 10:08 pm
 
Forum: Reviews, Compliments & Complaints
Topic: A+++ Customer Svc @ Moates
Replies: 2
Views: 1032

Re: How do you access the site?

Bookmark to EFIDYNOTUNING.COM on my phone then select forum. 90% of my time online is by phone. You can tell when I post from my phone because it looks as if it were typed by a kindergardner because of my fat ass fingers. I come here at least once a day even tho I don't post much to steal all you gu...
by bunso
Sun Jan 03, 2016 8:59 pm
 
Forum: The Range
Topic: How do you access the site?
Replies: 10
Views: 3041

Re: Steps to tune

This has been a good read. In the past I have tried the (Compare Tuner) option in BE betwen updated tune files but not sure it that option works right honestly. Im the type guy that you can tell me a million times but until I physically see something done then Im good. Im fairly decent on the N/A st...
by bunso
Sat Dec 26, 2015 9:31 pm
 
Forum: Foxbody Tuning
Topic: Steps to tune
Replies: 33
Views: 5098

Re: Meth Kits Snow Performance Stage 1

I cant really give any tuning advice on it honestly but I have installed it on a couple supercharged cars and it helped out the IAT temp issues we were seeing for sure. The main reason I started this thread was to see if anyone had tried the Snow Stage 1. I ended up going with the Snow Stage 2 just ...
by bunso
Tue Dec 22, 2015 9:41 pm
 
Forum: Speed Shop & Engine Talk
Topic: Meth Kits Snow Performance Stage 1
Replies: 6
Views: 1636

Re: IAT Sensor relocation

94LSVT wrote:mount it somewhere in your upper intake. theres a pipe plug in the trick flow right near the brake booster.


Hell I forgot about that plug. Lol. I was concentrating too hard on the opposite side of the intake. I figured someone has run into a similar situation. Thanks
by bunso
Thu Dec 10, 2015 8:51 am
 
Forum: Foxbody Tuning
Topic: IAT Sensor relocation
Replies: 4
Views: 1029

Re: IAT Sensor relocation

I knew the MAF had an IAT but I thought it was best to have the IAT after the Meth nozzle?
by bunso
Thu Dec 10, 2015 5:58 am
 
Forum: Foxbody Tuning
Topic: IAT Sensor relocation
Replies: 4
Views: 1029

IAT Sensor relocation

Any of you foxbody guys relocated the IAT along with using a meth nozzle in the On3 piping. With the On3 piping it uses a rubber elbow at the throttlebody and I can't find anything online where anyone mounts an IAT in a rubber boot successfully. I know mounting the Meth nozzle before this 90 degree ...
by bunso
Wed Dec 09, 2015 8:57 pm
 
Forum: Foxbody Tuning
Topic: IAT Sensor relocation
Replies: 4
Views: 1029

Re: Tire size, recommendations, launching

If your dead set on a decent hooking street tire after I could not get the 555's to bite I swapped over to the NT05 and it actually hooked pretty good for a street tire
by bunso
Tue Dec 08, 2015 8:08 pm
 
Forum: Racing & Dyno Results
Topic: Tire size, recommendations, launching
Replies: 10
Views: 2441

Re: Tire size, recommendations, launching

Those Nitto 555's will never hook. I tried them all the way down to 18psi and still blew them off. Way too hard of a tire. However they will last forever tho
by bunso
Tue Dec 08, 2015 8:06 pm
 
Forum: Racing & Dyno Results
Topic: Tire size, recommendations, launching
Replies: 10
Views: 2441

Re: SCT BA2800 MAF w/ K&N filter

SOLD!
by bunso
Tue Nov 17, 2015 8:11 pm
 
Forum: For Sale / Wanted
Topic: SCT BA2800 MAF w/ K&N filter
Replies: 1
Views: 799
Next

Return to advanced search