Search found 90 matches

Return to advanced search

Re: How to Simplify Timing on the Foxbody ECU

Hi, started the care with the new tune - started very quick. But hot start was not so pretty - after i let the fuel pump prime before - it was sometimes a little better. I set Adapt Ect Min Afect1 from 170 to 150 and startup enrichment from 90 to 240 x1.2. After that it would sometimes short after t...
by mustanghl
Sat Aug 19, 2017 1:51 pm
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

Re: How to Simplify Timing on the Foxbody ECU

Hi,
Thank you, i will try that tomorrow morning.

But can you please explain me why most of your tables are different in the view like i saw others ?

Why do you have on the y-axis the 2.00 in the upper line ?

And your table go from up to down ?

Is that ok for the PCM ?

Thank you
Horst
by mustanghl
Fri Aug 18, 2017 2:02 pm
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

Re: How to Simplify Timing on the Foxbody ECU

Hi,
i don`t understand - i thought to understand - that is the one and only table to use for now on ?

I used TunerPro showing in category style - and this spark table show`s up in Tuning - can you please tell me the name of the table to use ?

Thank you
Horst
by mustanghl
Fri Aug 18, 2017 12:47 pm
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

Re: How to Simplify Timing on the Foxbody ECU

Hi,
Thank you,

but i don`t get the data holding in the table !

After i filled the table and saved it - after i reopen it - everyting is back to all cell`s with 0.00 !

I used SPARK SEA LEVEL FN904A- Depreciated.

What did i make wrong ?

Thank you
Horst
by mustanghl
Fri Aug 18, 2017 5:29 am
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

Re: How to Simplify Timing on the Foxbody ECU

Hi,
thank you, but still have a question.

I have your newest A9L2 - but in the Sealevel Spark Table is all 0.

So now i have to copy from spark extended to Sealevel Spark Table (FN904A), and only can work with this table ?

Thank you
Horst
by mustanghl
Tue Aug 15, 2017 1:03 am
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

How to Simplify Timing on the Foxbody ECU

Hi, are the settings: Disable Altitude Spark Disable WOT Spark Functions already done ? If not, can the TunerPro HexEditor do that as well ? Tryed to find it out today - with WINHEX and the TunerPro Hex editor - but dit not find the lines - with 0x3713-0x3714 [+0x2000 intel offset] opcode DECIMAL: 4...
by mustanghl
Mon Aug 14, 2017 2:05 pm
 
Forum: Foxbody Tuning
Topic: How to Simplify Timing on the Foxbody ECU
Replies: 10
Views: 1596

Re: Higher Idle

Thank you
by mustanghl
Wed Aug 02, 2017 11:25 pm
 
Forum: Foxbody Tuning
Topic: Higher Idle
Replies: 7
Views: 1138

Re: Higher Idle

Hi,
nobody any idea - or help for solving my problem ?

Can i do that with the HEX-EDITOR - in what line do i find the Injector breakpoint ?

Thank you
Horst
by mustanghl
Wed Aug 02, 2017 1:48 pm
 
Forum: Foxbody Tuning
Topic: Higher Idle
Replies: 7
Views: 1138

Re: Higher Idle

Hi,
somebody any idea ?

Thank you
by mustanghl
Tue Aug 01, 2017 10:30 am
 
Forum: Foxbody Tuning
Topic: Higher Idle
Replies: 7
Views: 1138

Re: Higher Idle

Hi, Thank you 89gtsleeper I think i overlooked it 2 times - and i have this issues. I started from a new A92L ! But when i change Breakpoint - i get crazy - it always changes after when i save it - when i reopen it the data is changed - i thought that would be ok ! Here is a pic of my work before an...
by mustanghl
Mon Jul 31, 2017 10:07 am
 
Forum: Foxbody Tuning
Topic: Higher Idle
Replies: 7
Views: 1138

Higher Idle

Hi,
maybe somebody has a free eye, and can overlook -
and please tell me what adder or switch i did not find, Idle is higher than the 800 RPM.

But when i unplug the idle valve - idle does not drop to 800 RPM.

Thank you
Horst
A9L2OEM_MafActinFilterbox.BIN

4_A9L2OEM_MafActinFilterbox.xdl
by mustanghl
Sun Jul 30, 2017 2:43 pm
 
Forum: Foxbody Tuning
Topic: Higher Idle
Replies: 7
Views: 1138

Re: HPX PMAS / ACT Sensor

Hi, would it work - if i make all to stock, and just use the a9l file - and set CID to 347 ? I think i run out of time - and on tuesday morning i have to be at TUV - and i think otherwise i be not ready ? Don`t get holiday to work all the time on the car. Hope that works first this way. Thank you Ho...
by mustanghl
Thu Jul 27, 2017 11:48 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi, today i had only 78°F in the garage - but we had only 57°F outside ! So i think it should onlay go up to 90°F. But my biggest problem at the moment is - i can not set idle ! It always goes much higher after i connect SPOUT - TPS and ISC. I calculated Maf flow for Throttle Body Air Flow: Maf - 0....
by mustanghl
Wed Jul 26, 2017 2:53 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
i only thought you mean that it must be a FUNCTION - not a TABLE.

I made a screenshot of my work, would you please look at it - hope it is ok.

Thank you

Horst
by mustanghl
Wed Jul 26, 2017 7:23 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi, so it looks like ! Did i read it wrong - you said it`s a function - or did you mean it makes a function ? I understanded it like this - it must be a function - that`s why i did not use it ! But your table look different like my one - your scaling is other - for what do i need this ? Thank you Ho...
by mustanghl
Tue Jul 25, 2017 2:04 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
that would be helpful

Thank you
by mustanghl
Tue Jul 25, 2017 9:26 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
Thank you

In the moment - i don`t understand what you mean.

Thank you
Horst
by mustanghl
Tue Jul 25, 2017 4:40 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi, today i called a TUV guy, i sendet him last week all mods i have on the car - he said he thinks he can make it into my german papers of the car ! But he wants to do a speed test (Engine has now 60 Miles on it) on the AUTOBAHN too (Testing AFCO K-MEMBER) - I don`t know if my tune is good enough f...
by mustanghl
Mon Jul 24, 2017 3:08 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
i use the a9l2 Tune - but i don`t find act retard table.

Thank you
Horst
by mustanghl
Mon Jul 24, 2017 12:15 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
sorry

The Transfer is the part how the Sensor works - and that`s why they show wrong !?

Do you mean Fn126 / PT SPARK ADDER FOR ACT ?

Thank you
Horst
by mustanghl
Sun Jul 23, 2017 1:42 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Hi,
Thank you for information.

Does this look ok:

0.00 140
0.20 140
0.31 110
0.58 90
1.14 54
2.88 46
3.27 20
3.50 -10
3.63 -40
3.98 -40

But the Act Sensor show`s only 52°F and the ECT Sensor show´s only 100°F, when the engine is at normal operation temp !

Thank you
Horst
by mustanghl
Sun Jul 23, 2017 8:04 am
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: HPX PMAS / ACT Sensor

Thank you,
but i thought - that i read something about this conversion - and that i have to change some of the temperatures - because they are a little colder then before !

Thank you
Horst
by mustanghl
Sat Jul 22, 2017 1:50 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

HPX PMAS / ACT Sensor

Hi, can somebody tell me how to wire the PMAS ACT sensor up to the ECU ? And i think i have to make changes to ECT/ACT Transfer (FN703)- but don`t know the right settings - i thought i had that information already - but i don`t have them - and my search strings did not give me the right information....
by mustanghl
Fri Jul 21, 2017 2:03 pm
 
Forum: Foxbody Tuning
Topic: HPX PMAS / ACT Sensor
Replies: 23
Views: 3901

Re: GUFX - Universal ADX Testing

Hi,
downloaded all the files !

Now i have a patch register in my BIN File.

Will test it tomorrow
Thank you
Horst
by mustanghl
Fri Jun 23, 2017 3:14 pm
 
Forum: Foxbody Tuning
Topic: GUFX - Universal ADX Testing
Replies: 51
Views: 8070

Re: ADX Datalogging Files

Hi,
ok

Thank you
by mustanghl
Mon Jun 19, 2017 1:44 pm
 
Forum: TunerPro
Topic: ADX Datalogging Files
Replies: 15
Views: 5343

Re: ADX Datalogging Files

Hi,
maybe i don`t understand it right - it`s now a ADX file ?
so i do not use GUFB.XDF - i use GUFX_20161212.xdf ?
But wen i use in TunerPro RT Ctrl and press the F buttons - and hit UNIV in - it will not show anything !

Sorry for that stupid question.

Thank you
Horst
by mustanghl
Mon Jun 19, 2017 11:57 am
 
Forum: TunerPro
Topic: ADX Datalogging Files
Replies: 15
Views: 5343

ADX Datalogging Files

Hi,
alway get a error - that the files are broken.

Is that a problem on my side ?

Tryed winrar and the windows inside packer - both say it`s broken.

Thank you
Horst
by mustanghl
Sat Jun 17, 2017 1:33 pm
 
Forum: TunerPro
Topic: ADX Datalogging Files
Replies: 15
Views: 5343

Re: Ford 302 to 347 stroking

Hi Michael,
nobody else like you want to share there experience with me!

Ok my wish was that i always can change stuff with zero imbalance - so i don`t have to think on the internal stuff ?
Thank you
Horst
by mustanghl
Sat Oct 04, 2014 4:17 pm
 
Forum: Speed Shop & Engine Talk
Topic: Ford 302 to 347 stroking
Replies: 5
Views: 2156

Ford 302 to 347 stroking

Hi, hope this question is on it`s right place. Thinking about stroking my Ford 302 engine. But my EDIS-8 with crank trigger wheel is a thing want not miss - but most of or all stroker kits i found are 28oz balanced. Is there a chance to get it internal balanced - and i change the external hardware t...
by mustanghl
Fri Oct 03, 2014 4:01 pm
 
Forum: Speed Shop & Engine Talk
Topic: Ford 302 to 347 stroking
Replies: 5
Views: 2156

Re: Calibrated Maf

Thank you
by mustanghl
Sat Sep 20, 2014 3:34 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi,
what material is best for it ?
I mean size of the mesh, after i made me one - is it best to start with dialing fuel again with it ?
Or just stay with this settings ?
Thank you
Horst
by mustanghl
Fri Sep 19, 2014 5:05 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi,
thank you all - thanks you all for yor support !
So my idle is still at cold idle a little bad - does a mash fix that - or must i find another setup for this ?
Thanks again
Horst
by mustanghl
Fri Sep 19, 2014 4:29 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi Floodking88, thank you for your comment !!!! I know that most people use BE - but my budget don`t allow to use it at the moment, so i started with TUNERPRO - and registered it. TunerPro is not so bad. In the moment i have no mesh in my TUBE MAF - do i really need it ? Yes it looks like that my Ka...
by mustanghl
Fri Sep 19, 2014 3:40 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi Michael, did you have time to overlook it ? I know that i did not scale the MAF TRANSFER - but my engine do not use this much AIR MASS - i crorrect that over the winter. It looks like - you`re the only one who understand it - or nobody wants to say any wrong - ok if whe don`t make mistakes - we d...
by mustanghl
Fri Sep 19, 2014 1:56 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi Michael,
i took the Transfer sheet - that came with the HPX-E !
Then i changed - that it would fit to the wideband.
Thank you for looking at it.
Horst
by mustanghl
Fri Sep 12, 2014 10:50 am
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi,
did somebody take a look of what i did ?
Just want to know if i`m on the right way.
Thank you
Horst
by mustanghl
Thu Sep 11, 2014 2:10 pm
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi,
now i had it installed, and hope that someone can overlook - and maybe give me a tip if i did something wrong ?
Thank you
Horst
by mustanghl
Sun Sep 07, 2014 10:28 am
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi, ok - what i read and understand - it`s one of the best MAF you can get !? So when i use it with a 3" pipe - does somebody else builded in a FOXBODY ? What mods did you have to do - to fit it in ? The ACT sensor is different - but in the A9L you can not change the OHM settings - is it unusab...
by mustanghl
Sun Aug 03, 2014 10:02 am
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi Michael, sorry - i did not mean the price !!!!!!!! I mean the the technic - how to use it - thats to high for me - i can make much more wrong with stuff like that - you know i`m no Tuner - i`m starter or beginner. If i not work- I sit at my pc - drive maybe 1 time in the week - so it`s better to ...
by mustanghl
Mon Jul 28, 2014 11:28 am
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463

Re: Calibrated Maf

Hi Michael,
that looks too high for me !
I think that i don`t get this thing run !
Thank you
Horst
by mustanghl
Mon Jul 28, 2014 9:39 am
 
Forum: Foxbody Tuning
Topic: Calibrated Maf
Replies: 25
Views: 5463
Next

Return to advanced search