Search found 7 matches

Return to advanced search

Re: 2DCA Definition File (.xdf) for TunerPro

[color=#000000] I appreciate those files are old. The chip I use is 256Kb and I assume Nathan has the same. A little project one day will be to work out how to change the 64Kb files to work with the 256kb chip. Andrew - I am using the Ti Performance Chips. Andrew, the ti chips should be able to use ...
by Ghiaed1994
Sun Oct 20, 2019 2:19 am
 
Forum: Ford Euro & Aussie Tuning
Topic: 2DCA Definition File (.xdf) for TunerPro
Replies: 12
Views: 703

Re: 2DCA Definition File (.xdf) for TunerPro

Andrew,

Sorry to be a pest - all i could find was the Attached GUFB.xdf.

Would you have access to both the 256kb bin and definition files? Would you be happy to post?

Thanks,
Nathan
by Ghiaed1994
Fri Sep 27, 2019 6:43 am
 
Forum: Ford Euro & Aussie Tuning
Topic: 2DCA Definition File (.xdf) for TunerPro
Replies: 12
Views: 703

Re: 2DCA Definition File (.xdf) for TunerPro

Andrew and Ranga83,

Thank you soooooo much!

Really appreciate it - ready to test this weekend.

Nathan.
by Ghiaed1994
Fri Sep 27, 2019 6:18 am
 
Forum: Ford Euro & Aussie Tuning
Topic: 2DCA Definition File (.xdf) for TunerPro
Replies: 12
Views: 703

2DCA Definition File (.xdf) for TunerPro

All, Would anyone have access to a complete or near complete 2DCA Definition File (.xdf) for tuner pro? I am currently using the 2DCA_256k_v8.xdf from the Ti Performance Website but it dosnt have all the Scalers, Functions, Tables etc defined. I have changed to 42lb Injectors. The High Slope and Low...
by Ghiaed1994
Thu Sep 19, 2019 9:07 pm
 
Forum: Ford Euro & Aussie Tuning
Topic: 2DCA Definition File (.xdf) for TunerPro
Replies: 12
Views: 703

Re: Did I Just Wreck my MAF?

Decipha, Thank you for your response, i feel a lot better! When i get home i will try and increase the lower end of the MAF Curve, I am currently using: 90mm Ford Lightning / 03-04 Cobra Voltage Flow 16.00 1686.63 5.000 1686.63 4.839 1485.72 4.679 1342.28 4.518 1220.06 4.358 1104.82 4.198 993.50 4.0...
by Ghiaed1994
Thu Sep 19, 2019 8:35 pm
 
Forum: General Hardware
Topic: Did I Just Wreck my MAF?
Replies: 3
Views: 197

Did I Just Wreck my MAF?

Hey All, I have recently installed a 90mm Lighting MAF into my Falcon and used the following Diagram: http://www.efidynotuning.com/pics/maf/4to5.gif The only issue is i messed up Pins C and D - so it went A B D C. Question is - did i wreck my MAF? My Datalogger still shows voltage on the MAF but by ...
by Ghiaed1994
Wed Sep 18, 2019 3:48 am
 
Forum: General Hardware
Topic: Did I Just Wreck my MAF?
Replies: 3
Views: 197

Return to advanced search