Search found 429 matches

by dleach1407
2024 Mar 19, 02:09
Forum: The Range
Topic: Minimal posts
Replies: 9
Views: 321

Re: Minimal posts

Holley guys post on the Holley forum. Same with megasquirt. Stinger-performance has a good forum for their megasquirt ecus. I don't know anyone using sct any more and when i did it was only shops. Eectuning.org for tweecer and binary Editor
by dleach1407
2024 Feb 19, 19:01
Forum: Additional Support
Topic: At what RPM does a single coil not have enough dwell time
Replies: 3
Views: 415

Re: At what RPM does a single coil not have enough dwell time

Thanks, i thought it was closer to 7500, glad i asked. I'm helping a friend spec out his Holley setup and told him COP was a better option. It's a 408w with afr 225 heads with a ysi. I'm going to try and convince him to go with COP.
by dleach1407
2024 Feb 18, 23:39
Forum: Additional Support
Topic: At what RPM does a single coil not have enough dwell time
Replies: 3
Views: 415

At what RPM does a single coil not have enough dwell time

I remember reading somewhere that a single coil doesn't have enough dwell time to provide strong spark above a certain rpm. At what point should COP or even wasted spark be considered.
by dleach1407
2024 Feb 11, 01:36
Forum: The Garage & Build Threads
Topic: 1997 Mountaineer 5.0 for Coil-near-plug swap
Replies: 42
Views: 6942

Re: 1997 Mountaineer 5.0 for Coil-near-plug swap

They aren't explorer covers. The explorer has a removable filter neck. I've got a set off my 96 in my garage. They aren't the same
by dleach1407
2024 Feb 09, 18:42
Forum: The Garage & Build Threads
Topic: Mustang SBF EECIV to EECV Swap
Replies: 76
Views: 27139

Re: Mustang SBF EECIV to EECV Swap

ATPCR wrote: 2024 Feb 09, 07:59 Great to hear about the performance improvement. Also great to hear about first in your class in your local club and first overall.
I see the Temu link doesn't work because they sold out of the cheap pliers. Mine from Temu look a lot like what you have.

ADDEDAfter looking at your pictures, I hope my cheap pliers have the correct jaw.
Temu crimper pliers.jpg
Those look correct
by dleach1407
2024 Jan 28, 01:19
Forum: Additional Support
Topic: Stock slot MAF in a 4 inch tube
Replies: 2
Views: 334

Re: Stock slot MAF in a 4 inch tube

I just found the transfer for a 4 inch tube. Just need to know if they are all the same across 05-09 Fords. Thanks.
by dleach1407
2024 Jan 28, 01:05
Forum: Additional Support
Topic: Stock slot MAF in a 4 inch tube
Replies: 2
Views: 334

Stock slot MAF in a 4 inch tube

Any issues with running a stock slot MAF from an 05-09 mustang (or other ford) in a 4 inch tube? I want to make sure ill have enough resolution. I'll be running a draw through setup. Are they all the same calibration across Ford's? Im gonna grab one from a junk yard car. What years did they go to frequency based mafs? 11+?
by dleach1407
2024 Jan 28, 00:48
Forum: Additional Support
Topic: deka 5 injector data
Replies: 26
Views: 15365

Re: deka 5 injector data

canuck1 wrote: 2022 Jul 02, 23:21 FYI, I've been using the Continental data for my Siemens-Deka V (shorty) injectors since the earlier this year. I have to tell you it's a night and day improvement over the earlier model (Deka IV) data I had tried using before. It's nice to be able to input changes and have the expected result come back to you in a log. It helped me figure out very quickly that my MAF transfer function was accurate and the car is running best ever! I'm super happy you pointed me towards this info. Hope it works out as well for you when you get around to working on the truck again.

Sean
Really good to know the days i posted is wiring good. I'm still collecting parts for my truck but I'm pretty close to getting it running. My watts link suspension just showed up.
by dleach1407
2023 Jul 11, 21:10
Forum: RZASA - 03/04 Marauder
Topic: ECT location
Replies: 1
Views: 2486

ECT location

Is there any issue with putting the ECT sensor on the drivers side front instead of the passenger side front?