You can write 56k to the TI chip no problem.
My experience is car won't run, fuel pump is constantly on.
256k there's no issue because bank 8 is the start.
2 and 4 bank 256k are simple.
Search found 93 matches
- 2024 Sep 17, 16:02
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 44
- Views: 34627
- 2024 Aug 13, 08:47
- Forum: TunerPro Support
- Topic: Tunerpro updates
- Replies: 1
- Views: 1931
Re: Tunerpro updates
working here
- 2024 Feb 01, 08:21
- Forum: PCM / ECU / EEC Tuning
- Topic: Pcmflash mcmflash recommendations
- Replies: 13
- Views: 12508
Re: Pcmflash mcmflash recommendations
yup, and... yup. TCM module.BOOSTEDEVERYTHING wrote: ↑2024 Jan 25, 14:03Did you happen to receive your PCMFlash stuff yet? If so, have you used it successfully? Did you find that you needed any more modules than those in the getting started writeup? Thanks034v wrote: ↑2023 Oct 06, 06:12 To shine some light here..
I ordered all 4 PCM Flash modules myself. Basing my ordering process off the Getting Started writeup and ECUtools information.
I searched the ECUtools site for updates and news, cross-referenced info from here and other US sites to make my decision.
The rally of information based on ECU PN/Strategies/Makes swayed my decision to just spend the $493.50 USD vs trying to fart around with Derive/SCT PRP or other Boxed Unit types and spending $2500+.
Granted: I've been told in the past by several people that things I come up with "won't work" but prove them wrong every time.
My $.02 is just order the modules be ahead. They do work and will get you that much further ahead of the curve. Might need extra, might not.
Now, once I receive them, if you haven't found a solution it's quite possible I will.
I have 96, 2013 and 2019 Ford vehicles in my garage. 4v to 3.5L EB that they are getting used on first. Also a 10 3v 5.4L my dad wants tuned without dealing with the x4 again.
Hope this helps. I should receive these in 2 weeks as they've left Russian Federation as of 10-5.
identifies 2 banks, wont read. 4 banks, hit or miss. probably xtal speed thing. later 4 banks it reads...
no issues on black oak, spanish oak and 11-up stuff at all. just get the TCM module.
- 2023 Oct 06, 06:12
- Forum: PCM / ECU / EEC Tuning
- Topic: Pcmflash mcmflash recommendations
- Replies: 13
- Views: 12508
Re: Pcmflash mcmflash recommendations
To shine some light here..
I ordered all 4 PCM Flash modules myself. Basing my ordering process off the Getting Started writeup and ECUtools information.
I searched the ECUtools site for updates and news, cross-referenced info from here and other US sites to make my decision.
The rally of information based on ECU PN/Strategies/Makes swayed my decision to just spend the $493.50 USD vs trying to fart around with Derive/SCT PRP or other Boxed Unit types and spending $2500+.
Granted: I've been told in the past by several people that things I come up with "won't work" but prove them wrong every time.
My $.02 is just order the modules be ahead. They do work and will get you that much further ahead of the curve. Might need extra, might not.
Now, once I receive them, if you haven't found a solution it's quite possible I will.
I have 96, 2013 and 2019 Ford vehicles in my garage. 4v to 3.5L EB that they are getting used on first. Also a 10 3v 5.4L my dad wants tuned without dealing with the x4 again.
Hope this helps. I should receive these in 2 weeks as they've left Russian Federation as of 10-5.
I ordered all 4 PCM Flash modules myself. Basing my ordering process off the Getting Started writeup and ECUtools information.
I searched the ECUtools site for updates and news, cross-referenced info from here and other US sites to make my decision.
The rally of information based on ECU PN/Strategies/Makes swayed my decision to just spend the $493.50 USD vs trying to fart around with Derive/SCT PRP or other Boxed Unit types and spending $2500+.
Granted: I've been told in the past by several people that things I come up with "won't work" but prove them wrong every time.
My $.02 is just order the modules be ahead. They do work and will get you that much further ahead of the curve. Might need extra, might not.
Now, once I receive them, if you haven't found a solution it's quite possible I will.
I have 96, 2013 and 2019 Ford vehicles in my garage. 4v to 3.5L EB that they are getting used on first. Also a 10 3v 5.4L my dad wants tuned without dealing with the x4 again.
Hope this helps. I should receive these in 2 weeks as they've left Russian Federation as of 10-5.
- 2023 Aug 23, 08:54
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 44
- Views: 34627
Re: What is Everyone using for Chips Now?
yes works just like a f3v2. no different addressing required.rusty_lawrence wrote: ↑2023 Aug 15, 22:59SCT works ok with the jaybird? Any different settings? I asked this somewhere else on the forum too
- 2023 Jun 17, 12:14
- Forum: CRAI8 - 98 Fords (Most All)
- Topic: Rev limiter scalars having no effect
- Replies: 10
- Views: 8537
Re: Rev limiter scalars having no effect
MNPIP8 to ZERO done yet?
11,250,000 / (1/2 # of cylinders × max rpm)
Or
11,250,000 / (4×7000)
11,250,000 / (1/2 # of cylinders × max rpm)
Or
11,250,000 / (4×7000)
- 2023 May 16, 13:54
- Forum: Additional Support
- Topic: 2003 full size PCM from a Taxi
- Replies: 3
- Views: 4326
Re: 2003 full size PCM from a Taxi
Full Size Luxury Sedan EEC-V.. RZAS0 Strategy MPC-195 Hardware
Some were CNG so verify.
My guess is it will work just fine.
http://www.obdtester.com/ford-ecu-updat ... 12A650-BMA
Some were CNG so verify.
My guess is it will work just fine.
http://www.obdtester.com/ford-ecu-updat ... 12A650-BMA
- 2023 Apr 20, 08:12
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 44
- Views: 34627
Re: What is Everyone using for Chips Now?
57344 (56k) byte starting at 22000, which is bank 8 in a 256k. That is where the tuning will need to reside. Bin Size in HEX 40000..
- 2023 Apr 19, 06:49
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 44
- Views: 34627
Re: What is Everyone using for Chips Now?
Good device. Just some ECU's have slight capacitor interference but it's easy to manipulate around.
Reminder.. all 56k MUST be a 256k Binary
- 2023 Apr 18, 08:33
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 44
- Views: 34627
Re: What is Everyone using for Chips Now?
The Burn2/FE/FA was a Moates setup. I've seen some copies of it, but not sure if you can find the adapter for the J3 anymore.
The TI Performance chips, I always order their burner with them. Like $230 for both shipped from the Aussie world.
Their burner works with TunerPro RT and has a unique bank assignment feature, but will not program anything but the TI Performance chip due to the ribbon cable. In other words, it wont burn via the card edge connector.