Search found 91 matches

by 034v
2024 Feb 01, 08:21
Forum: PCM / ECU / EEC Tuning
Topic: Pcmflash mcmflash recommendations
Replies: 13
Views: 9103

Re: Pcmflash mcmflash recommendations

BOOSTEDEVERYTHING wrote: 2024 Jan 25, 14:03
034v wrote: 2023 Oct 06, 06:12 To shine some light here..

I ordered all 4 PCM Flash modules myself. Basing my ordering process off the Getting Started writeup and ECUtools information.

I searched the ECUtools site for updates and news, cross-referenced info from here and other US sites to make my decision.

The rally of information based on ECU PN/Strategies/Makes swayed my decision to just spend the $493.50 USD vs trying to fart around with Derive/SCT PRP or other Boxed Unit types and spending $2500+.

Granted: I've been told in the past by several people that things I come up with "won't work" but prove them wrong every time.

My $.02 is just order the modules be ahead. They do work and will get you that much further ahead of the curve. Might need extra, might not.

Now, once I receive them, if you haven't found a solution it's quite possible I will.

I have 96, 2013 and 2019 Ford vehicles in my garage. 4v to 3.5L EB that they are getting used on first. Also a 10 3v 5.4L my dad wants tuned without dealing with the x4 again.

Hope this helps. I should receive these in 2 weeks as they've left Russian Federation as of 10-5.
Did you happen to receive your PCMFlash stuff yet? If so, have you used it successfully? Did you find that you needed any more modules than those in the getting started writeup? Thanks
yup, and... yup. TCM module.

identifies 2 banks, wont read. 4 banks, hit or miss. probably xtal speed thing. later 4 banks it reads...

no issues on black oak, spanish oak and 11-up stuff at all. just get the TCM module.
by 034v
2023 Oct 06, 06:12
Forum: PCM / ECU / EEC Tuning
Topic: Pcmflash mcmflash recommendations
Replies: 13
Views: 9103

Re: Pcmflash mcmflash recommendations

To shine some light here..

I ordered all 4 PCM Flash modules myself. Basing my ordering process off the Getting Started writeup and ECUtools information.

I searched the ECUtools site for updates and news, cross-referenced info from here and other US sites to make my decision.

The rally of information based on ECU PN/Strategies/Makes swayed my decision to just spend the $493.50 USD vs trying to fart around with Derive/SCT PRP or other Boxed Unit types and spending $2500+.

Granted: I've been told in the past by several people that things I come up with "won't work" but prove them wrong every time.

My $.02 is just order the modules be ahead. They do work and will get you that much further ahead of the curve. Might need extra, might not.

Now, once I receive them, if you haven't found a solution it's quite possible I will.

I have 96, 2013 and 2019 Ford vehicles in my garage. 4v to 3.5L EB that they are getting used on first. Also a 10 3v 5.4L my dad wants tuned without dealing with the x4 again.

Hope this helps. I should receive these in 2 weeks as they've left Russian Federation as of 10-5.
by 034v
2023 Aug 23, 08:54
Forum: Moates Support
Topic: What is Everyone using for Chips Now?
Replies: 28
Views: 23072

Re: What is Everyone using for Chips Now?

rusty_lawrence wrote: 2023 Aug 15, 22:59
034v wrote: 2023 Apr 12, 18:53 TI Performance and SCT 6600 only for me.
SCT works ok with the jaybird? Any different settings? I asked this somewhere else on the forum too
yes works just like a f3v2. no different addressing required.
by 034v
2023 Jun 17, 12:14
Forum: CRAI8 - 98 Fords (Most All)
Topic: Rev limiter scalars having no effect
Replies: 10
Views: 5750

Re: Rev limiter scalars having no effect

MNPIP8 to ZERO done yet?

11,250,000 / (1/2 # of cylinders × max rpm)

Or

11,250,000 / (4×7000)
by 034v
2023 May 16, 13:54
Forum: Additional Support
Topic: 2003 full size PCM from a Taxi
Replies: 3
Views: 3335

Re: 2003 full size PCM from a Taxi

Full Size Luxury Sedan EEC-V.. RZAS0 Strategy MPC-195 Hardware

Some were CNG so verify.

My guess is it will work just fine.

http://www.obdtester.com/ford-ecu-updat ... 12A650-BMA
by 034v
2023 Apr 20, 08:12
Forum: Moates Support
Topic: What is Everyone using for Chips Now?
Replies: 28
Views: 23072

Re: What is Everyone using for Chips Now?

dleach1407 wrote: 2023 Apr 19, 21:52 How does one convert a 56k bin to 256k?
57344 (56k) byte starting at 22000, which is bank 8 in a 256k. That is where the tuning will need to reside. Bin Size in HEX 40000..
by 034v
2023 Apr 19, 06:49
Forum: Moates Support
Topic: What is Everyone using for Chips Now?
Replies: 28
Views: 23072

Re: What is Everyone using for Chips Now?

wwhite wrote: 2023 Apr 18, 11:39
Nxcoupe wrote: 2023 Apr 17, 18:23 I have one of those TI chips. Man they are stupid expensive.
I think I priced the J3 TI chip for $65 usd, last weeks dollar conversation, I’m thinking about buying a batch
Good device. Just some ECU's have slight capacitor interference but it's easy to manipulate around.

Reminder.. all 56k MUST be a 256k Binary
by 034v
2023 Apr 18, 08:33
Forum: Moates Support
Topic: What is Everyone using for Chips Now?
Replies: 28
Views: 23072

Re: What is Everyone using for Chips Now?

Nxcoupe wrote: 2023 Apr 17, 18:23 I have one of those TI chips. Man they are stupid expensive.

034V, where can you get that burner?
The Burn2/FE/FA was a Moates setup. I've seen some copies of it, but not sure if you can find the adapter for the J3 anymore.

The TI Performance chips, I always order their burner with them. Like $230 for both shipped from the Aussie world.

Their burner works with TunerPro RT and has a unique bank assignment feature, but will not program anything but the TI Performance chip due to the ribbon cable. In other words, it wont burn via the card edge connector.
by 034v
2023 Apr 16, 08:21
Forum: PCM / ECU / EEC Tuning
Topic: 88 Mustang GT speed denisty
Replies: 2
Views: 2964

Re: 88 Mustang GT speed denisty

I have a full D9S xdf for the Lincoln Mark VII, but it would take some manipulation to work on the Mustang SD.

It's SFI-SD3 hardware.
by 034v
2023 Apr 14, 19:00
Forum: Moates Support
Topic: What is Everyone using for Chips Now?
Replies: 28
Views: 23072

Re: What is Everyone using for Chips Now?

The TI Performance chip requires all 56k to be 256k as well.

Tuning must reside on bank 8 of a 256k binary.