EFIDynoTuning Forum

GUFX - 89-93 Foxbody ECUs
Decipha's custom GUFX strategy covers all 89-93 foxbody ecu's including the 88 mass-air california ecus.

CBAZA - 94/95 Mustang V8 ECUs
Covers all sn94/95 mustang v8 ecu's.

CDAN4 - 96/97 Fords (Most All)
Covers most all fords in the 96/97 model year including but not limited to mustangs v6, v8, cobra, thunderbids, lincoln town car, grand marquis, crown vic and even some trucks and vans.

CRAI8 - 98 Fords (Most All)
Covers most all 98 fords including mustang v6, v8, cobra, lincoln town car, grand marquis and crown vic.

CVAF1 - 99/01 (excludes late 2001)
Covers v8 mustangs in 99-early 01 years. Can be configured for V6 easily and cobras as well as trucks and other fords if hardware is compatible.

FBGI0 - 02-04 Mustangs (ALL)
European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.

RZASA - 03/04 Marauder
Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.

MNAE0 - 00/01 Lightning
00/01 SVT Lightning

OMAE2 - 02/03 Lightning & Harley
Can be used on all 2002-2003 harley trucks and lightnings.

TAUF0 - 2004 Lightning ONLY
Only used on the 2004 lightning.

MQAI0 - 00-03 Expedition, Navigator & Linc' Blackwood
Used on Expedition, Navigator and Blackwood. Can control 4R100 transmissions.

MZAK0 - 99-04 F-250 5.4L V8 & V10 Gas
Can be used on all 99-04 F-250 Gassers.

KRAF5 - 99-02 Zetec
Used on the 99-02 Zetecs and SPI's in the ford focus.
Specifically used for Bostig Conversions.

PRDO0 - 99-06 Ranger
Used on the 4cyl 99-06 ranger with single coils and theft disabled.

AHAC2 - Mid 90s Bronco & F-Series
Used on mid 90s mass-air broncos and F-Series trucks. SMD-221 Hardware.
Cal Codes: HOG0, HOG1, TIP1, VEX1, WAY1

A1C - 80/90s EFI-SD4x Speed Density
A1C calibration can be modified and configured to operate all EFI-SD4x ECUs in 4 cylinder, 6 cylinder and 8 cylinder configurations.

C9C1 - 80s/90s Speed Density EFI-SD2x
C9C1 calibration can be modified and configured to operate all EFI-SD2x ECUs in 4 cylinder, 6 cylinder and 8 cylinder configurations.

SuperCoupes
All 89-95 Supercoupes, GURE, GSALC, GSALI, CZAW0

PCM Tuning
For all non ford or non-listed ECU tuning. This would include can-bus ecu's such as powerpc copperhead tricore and siemens ecus. As well as GM, Dodge or any aftermarket controller tuning etc...

Euro & Aussie Tuning
Specific to none US ford tuning as some of the algorithms are slightly different.

Hardware, Programming & Disassembly
All hardware related, disassembly / programming and code discussions belong here.

TunerPro Support
Any TunerPro specific issues belong here.

Moates Support
Issues pertaining specifically to moates equipment belongs here.

Speed Shop & Engine Talk
For anything machine shop / speed shop or engine specific. More technical than the range but not quite tuning specific.

The Garage & Build Threads
Place for your vehicle notes and blow-by-blow build threads.

Additional Support
Anything not covered in the other forums.

The Range
Come shoot the shit or scope out the scenery. Either way this is for all non specific posts.